Mirror Stainless Steel Channel Frame Vinyl - Backed Plate Glass

Add to cart
  • Description
  • More

13 x 13 x 13 mm 20 gauge type 304 satin finish stainless steel channel is a one-piece roll formed member that encases mirror and backing revealing a tight mitered corner. Mirror is vinyl backed and installed on two wall brackets and held secure by theft-resistant screws.

Frame: alloy 18-8 stainless steel, grade 304, 20 gauge. Unitized all roll-formed one piece construction. Exposed surfaces have satin finish. Edges and corners are burr free. All glazed mirrors are warranted against silver spoilage for 15 years. Filler: Expanded polyethylene microcell foam sheet material, abrasion resistant and shock absorbing, water resistant, 3mm total layer thickness.

Install “H” wall brackets level and plumb per diagram location using ONLY No. 10 pan head screws (supplied by others). Hang mirror on brackets and tighten locking screw at bottom (note: this screw should be started prior to hanging mirror on wall brackets). For mounting
height standards refer to current Building Code of Australia for able bodied and/or disabled use.

Suffix Description:
B Tempered glass 6mm polished tempered glass.
C Stainless steel mirrors grade 304 stainless steel polished to No. 8 mirror finish.
D Lexan Dura-Mir™ fabricated of 6mm polycarbonate sheet.
E Plexiglas® 6mm acrylic plastic, lightweight and shatter resistant.
L Laminated glass 6mm thick