DIRECTIONS FOR USE
Before applying Synteko Newshine make sure that the floor is clean.
Sweep, mop or vacuum clean the floor.
Old soap, grease, polish etc. are removed by washing with water and Synteko Remover 1692 (see separate
data sheet.
Apply Synteko Newshine in a thin, even layer using a moist floor mop or a nonflocculent cloth. Leave the floor to dry for approx. 30 minutes before walking on it. Synteko Newshine leaves a protective film, which will help maintain the beautiful look of the floor.
Subsequent treatment or polishing is not necessary. Cleaning can take place with a moist floor mop without Synteko Newshine 1696 being dissolved.
Vacuum cleaning and mopping with a Synteko Super Clean 1697 solution and a well wrung cloth is normally sufficient.
ENVIRONMENTAL DATA
Keep out of reach of children. Detailed information and guidance is provided in our MSDS (Material Safey Data Sheet).
