Surface Mounted Facial Tissue Dispenser Stainless Steel dispenses 300 single-ply or 150 two-ply sheets. Dispensing slot has fully hemmed-in rolled edge for snag free dispensing and user safety.
Cover shall be 22 gauge type 304 stainless steel alloy 18-8 and shall be permanently attached to back with 2 stainless steel rivet pins and secured by a concealed resealable latch.
Back cover/mounting plate shall be fabricated of 22 gauge corrosion protected steel.
All exposed surfaces shall be satin finish and be protected during shipment with PVC film easily removable after installation.
INSTALLATION:- Surfaced mounted with four mounting holes- Holes are located at the back of the dispenser- Held up with 10 self tapping screws (screws not included)- Hinged front cover which snaps onto the latch integral with the back mounting plate- For mounting height standards please refer to The Building Code of Australia