All exposed surfaces shall have a satin finish and shall be protected during shipment with PVC film easily removable after installation.
Towel dispensing slot shall have a fully hemmed -in the rolled edge for snag-free dispensing and user safety.
Dispenser door shall be attached to cabinet at side with a full-length 9/64" diameter (Ø3.5) heavy-duty stainless steel multi-staked piano hinge and shall be held closed with a flush rimless tumbler lock keyed alike to other ASI JD MacDonald washroom equipment.
Waste bin shall have a fully hemmed top edge for safety and a rear handle for service ease and is retained by a tumbler lock keyed alike to other ASI JD MacDonald washroom equipment.
Face trim shall be 1-1/16′′ (27) wide formed from one piece with no miters, welding or open seams and have 1/8′′ (3) radiused return to the wall. Structural assembly of body and door components shall be of welded construction.