Paper Towel Dispenser and Waste Bin 26.5L - Simplicity Collection

ASI JD Macdonald
Add to cart
  • Description
  • More
  • Specifications

Paper Towel Dispenser and Waste Bin 26.5L (Simplicity) dispenses 800 standard multi-fold, 600 standard C-fold or 1,100 standard single-fold paper towels with 26.5 L stainless steel waste receptacle.

- Waste capacity of 26.5 litres
- Holds and dispenses 800 standard multi-fold or 600 standard C-fold or 1100 standard single-fold paper towels
- Towel dispenser, door, frame, waste bin and cabinet are fabricated of alloy 18-8 gauge stainless steel, grade 304

Paper Towel Dispenser, cabinet, door, frame and waste bin shall be fabricated of 18-8 stainless steel, grade 304. The cabinet shall be 20 gauge with a 25mm wide perimeter trim to lay flush against a wall and shall have no exposed fastening devices.
All exposed surfaces shall have a No. 4 satin finish and shall be protected by a PVC film easily removable after installation.
Available models: recessed or surface mounted

Towel dispensing opening shall have a fully hemmed-in rolled edge for snag free dispensing and user safety. Waste bin shall have hemmed edges for safety.

Full face door shall be 18 gauge, fabricated from one piece with no mitres or seams on face and shall have a 13mm square to return to the wall wsith no visible seams on door face.

Door shall be attached to cabinet with a full length 5mm diameter stainless steel multi-staked piano hinge and shall be held closed with two tumbler locks keyed alike to other ASI JD  MAcdonald washroom equipment. 

Waste bin door shall be attached to cabinet with a spring-loaded stainless steel piano hinge and shall have the international waste symbol on face.

Adjustable guide shall be provided to allow dispensing of single-fold, multi-fold or C-fold paper towels.

Structural asssembly of all components shall be of welded construction.

Over-all Dimensions 330 x 1397 x 165 mm
Wall Opening: 292 x 1359 x 152 mm
Warranty: One Year
Note: All ASI JD MacDonald disabled compliant products when installed must be in accordance with AS1428 to ensure the specified product is complying with all washroom specification requirements.