There are certain types of stains that will only dissolve in an alkaline, ammoniated solution. Amsolve is the product for this application. It contains ammonia, detergents, builders, and sequestering agents. These ingredients work at the level of nanoparticles to dissolve acidic and protein-based soils, thereby removing them from fibres.
Application
Carpet Spotting:
Absorb liquid spillages and scrape up or vacuum solid soilage
before applying spotter.
Apply neat AMSOLVE from a spraygun directly onto the
remaining stain or spot. Do not over-wet the carpet. Gently
work the AMSOLVE into the stain working from the outside
towards the centre. After allowing time to react, blot
out the stain with a clean white cloth or paper towel.
Alternatively, extract area with extraction detergent solution.
Always rinse, neutralize or extract after spotting with
AMSOLVE. Agar NEUTRALIZER is good for this.
Results are always best when spillages are cleaned
promptly.
Carpet Pre-Spraying:
- To restore old synthetic carpets such as acrylic, nylon and
polyesters, dilute 1 part AMSOLVE with 5 to 10 parts water
and uniformly pre-spray the dirty traffic areas.
- Work in with carpet rake or wand, allow 5 minutes to react
then extract with either pure water or a diluted solution of
extraction detergent.
DOWNLOAD AMSOLVE CARPET FOOD, PROTEIN and BLOOD STAIN REMOVER MSDS