DIRECTIONS FOR USE:
Preparation:
Remove old finish using Xpoly8 or Zip Strip floor stripper. To improve wetting and cleaning add 1 cup of Tempo HD or Citron neutral detergents to stripping solution. Wet scrub the floor using a high productivity black pad. Once old finish had been removed, pick up excess solution with mop and bucket or autoscrubber containaing clean potable water.
Application:
Dry burnish floor before applying sealer. Apply either (I) 4 to 6 coats of THERMAGLO PLUS to freshly
stripped floor or (ii) 2 coats of Superior Seal followed by 2 to 4 coats of THERMAGLO PLUS. Allow approximately
30 minutes drying time between coats.
Maintenance:
Dust mop floor daily. Clean with Tempo HD or Citron neutral detergents. For best results use
Glokleen (cleaner/maintainer) through an autoscrubber or in a mop and bucket
