Radial Timber Sealer | Timber Finishes
From
Add to cart
  • Description
  • More

It can be used wherever a true unpigmented clear timber sealer is required to repel and control moisture, hence minimises splitting, cracking and checking that can occur.

This is an unusual product as its a sealer that prevents splitting, cupping and checking of new external wood surfaces, but completely allows it to go grey with UV. It lasts between 6-12 months and if the wood is durable, you don't need to ever treat it again.

It still allows the timber to grey off naturally while leaving it look and feel like timber. RADIAL TIMBER SEALER can be applied to hardwoods used for external cladding, window frames, fences, trellis, decking and pergolas.

It is a unique blend of organic and inorganic resins combined with an effective mouldacide, which has been developed to seal and protects Australian Timber.

Radial Timber Sealer's Key features are:

    Once off application for newly installed durable timber, where the desired result is to weather naturally
    Unpigmented and contains no UV agent so allows the timber to turn silver-grey
    Clear finish formulated to control moisture and even stops wetting for around 6 months
    Highly effective moisture control for 12 months allows the timber to completely season naturally
    Contains a powerful mouldacide that prevents sapstain or bluestain moulds during seasoning

Directions For Use

Ensure a clean dry surface, free from dirt, grease and wax. Greyed timber should first be cleaned with a suitable wood cleaner such as Preschem GREY DECK CLEANER. Brush spray or wipe one generous coat of RADIAL TIMBER SEALER on to the timber and allow 24 hours drying time.

It can be applied by any convenient means, such as brush, roller, spray or dip application. Exterior floors or decks can be easily treated with a lamb’s wool applicator. If the timber still looks dry, another application may be required. A minimum of 24 hours drying time for decking and areas subject to foot traffic is advisable. Ensure all end grain wood is well coated to minimize water absorption.
Maintenance

RADIAL TIMBER SEALER will remain water repellent for up to 12 months on fully exposed timber in most conditions. It is designed to a true one time only application on new timber. Note that it will lose water repellency over time. However, if the customer wishes to maintain water repellency while retaining the natural silver-grey weathered look, then it is recommended that Preschem’s WEATHER REPELLANT is used.
Approximate Coverage
 Green  Seasoned
Dressed  9-11 m2/litre  11-12 m2/litre
Rough Sawn  7-8 m2/litre  8-9 m2/litre
Clean Up

Mineral Turps
Packaging

4, 10 and 20 litre cans.
First Aid and Safety Directions

Avoid contact with skin by wearing gloves and protective clothing. Don’t breathe vapour, spray or mist. If poisoning occurs, contact a Doctor or Poison Information centre on 13 11 26

Eyes
Hold eyes open, flood with water for at least 15 minutes.

Skin
Remove contaminated clothing and wash skin thoroughly with soapy water.

If Swallowed
Do not induce vomiting. Give a glass of water to drink and seek immediate medical attention. Do not give water to unconscious patient.