USE:
Extinguish all flame sources and pilot lights. Ensure adequate ventilation, or wear a solvent respirator. Apply SAFESEAL STRIPPER undiluted to a small workable area and allow 5 minutes contact. Do NOT allow to dry. Scrub, pick up and rinse with water. Continue until the full area is completed.
NOTE: This product is highly flammable and should be stored away from naked flames. All sources of ignition should be eliminated when using SAFESEAL STRIPPER.
SAFETY:
First Aid: If poisoning occurs contact a doctor or Poisons Information Centre on Ph: 131126, do NOT induce vomiting.
Eyes: If splashed in eyes, flush with water for 15min. Seek medical advice.
Skin: Wash affected area with soap and water.
Inhalation: If mists are inhaled, remove patient to fresh air. Seek medical advice.
Swallowed: Do NOT induce vomiting. Give milk or water to dilute. Seek medical advice
Download Safeseal Stripper MSDS
