Foamers

Add to cart

Mesto 3270FE and 3270FO Foaming Sprayers 8L with a plastic tank that has a large pressure reservoir, suitable for cleaning chemicals, acid and alkaline liquids.

Available in EPDM and Viton Seals.

From
Add to cart

Mesto Inox Foaming Pressure Sprayer with stainless steel tanks is suitable for garden chemicals and detergents.

Safety valve and pressure gauge are exchangeable. Spare parts compartment on the device. Pump holder. Spray and extension wand bracket. Sight glass to check filling level.

From
Add to cart

Mesto INOX PLUS Pressure Sprayers are suitable for Oils, vehicle cleaning, mild caustic cleaning agents & petroleum products. It has a professional pump made from brass with a big handle for a convenient carrying and pumping. Your perfect sprayer for release agents.

Spare parts compartment on the device. Pump holder and Funnel cover.  Spray and extension wand bracket.- It has a brass flat jet nozze 80-01E with fine filter for a fine and economically distribution of liquids.

Washfoam- 1.2L Handheld Pump-Up Foam Sprayer

VO03 040779FS
Add to cart

Washfoam- 1.2L Handheld Pump-Up Foam Sprayer creates a Real Clinging Foam Like Shaving Cream. Great for cleaning, hand carwash, and concrete removers.

Equipped with EPDM seal. It has an actual capacity of 1000 ml. Max. pressure: 44 psi / 3 bar. Heavy duty head & pump. Automatic safety pressure valve. HDPE bottle. It has Anti-glide base ring.

 

From
Add to cart

Mesto 3132FO (ph 1-9)and 3132FE (ph 7-14) Foaming Sprayers 1.5L with plastic tank, suitable for strong acid agents. These are not a bad alternative if you don't have a pressure washer with a foam gun.

Available in EPDM and Viton (FPM) Seals. Professional foamers for small area.
Add to cart
Injecting foam based chemicals for Termicide chemicals. It is equipped with EPDM seal.
 It has an actual capacity of 1000 ml. It has a liquid capacity of 900 ml. Max. pressure: 44 psi / 3 bar. Heavy duty head & pump. Automatic safety pressure valve. Flexible tube & stainless steel injector.

 

Pump Up Foamer

Add to cart
PUMP UP FOAMER

European Made Pump up Foamer with unique nozzle offers the option of regular spray or thick foam. 1.7ltr capacity, tough, durable. Heavy duty Viton O-ring. Features a pressure relief valve and is resistant to a wide range of chemicals.

 

Add to cart

Injecting foam based chemicals for Termicide chemicals. Resistant to most types of petroleum based solvents, brake cleaners, tyre shine & degreasers.

 

Pin type air connector / Can be pressurised manually or by compressed air. Equipped with VITON seal. Max. pressure: 58 psi / 4 bar. Actual capacity: 1600 ml. Heavy duty head & pump. It has a liquid capacity of 1400 ml. It has automatic safety pressure valve. Dual pressurizing system. Spiral hose stretchable to 1.2 meter.

Dual System Sprayers can be pressurized either by manual pumping or with air compressor.

 

Add to cart

For Applying foam based chemicals for cleaning applications.

Creates a Real Clinging Foam Like Shaving Cream. Equipped with VITON seal. It has a liquid capacity of 1400 ml. It has actual capacity of 1600 ml. Max. pressure: 44 psi / 3 bar. Heavy duty head & pump. Automatic safety pressure valve. Spiral hose stretchable to 1.2 meter.

 

Add to cart
Robust structure. NBR gaskets & O-rings. Safety pressure valve. Liquid capacity 3lit. Working pressure 3 bar / 44psi
Add to cart
It has  a robust structure with safety pressure valve. VITON gaskets & O-rings. It has a liquid capacity 5 litre. Working pressure 3 bar / 44 psi.
Add to cart
Creates a Real Clinging Foam Like Shaving Cream.It has a robust structure with safety pressure valve.
VITON gaskets & O-rings. It has a liquid capacity 5 lit. Working pressure 3 bar / 44 psi.

 

Add to cart
Applying / injecting foam based chemicals. 12 lit. Stainless steel tank with large oval opening for filling.
It has an advanced easy click-on lid. Auto & manual safety pressure release valve. Solvent resistant seals & hose. Working pressure: 9.5 bar / 130 psi. Works with compressed air.

 

Add to cart

Great as a container for chemicals or beer keg. It has a large oval opening for filling,  with advanced easy click-on lid. Stainless steel inlet, outlet & suction tube

 

From

The 900-2PU pump-up foamer technology provides spot cleaning and sanitation solutions for the industrial and institutional markets.

DISCONTINUED. PLEASE CLICK HERE FOR THE NEW FOAM DISPENSER

Patented dual tube technology draws the chemical and air from the tank into separate tubes creating thick foam when mixed at the trigger operated foam wand. Flow in the air tube is controlled by a needle valve giving an operator the ability to control foam consistency.

This type of foamer should only be filled to 3/4 volume, as this allows for the pumped in air to assist with proper function of the foamer. Available in 2L and 7.5L.

Click here to download the Pump Up Foaming Manual.

Add to cart

The Soft Brush Airless Foamer is a foam cleaning system that continually creates foam through the soft bristle brush. The soft bristled brush will not damage paintwork or scratch surfaces and the foam continually flushes debris from the bristles.

Very low volume, balanced output provides ideal foam volume at the brush head. Available in soft or stiff brush.

The Stiff Brush Airless Foamer is a foam cleaning system that continually creates foam through the stiff bristle brush, without the need for compressed air. Great for tough cleaning jobs. Design for use on non painted surfaces the foam continually flushes debris from the bristles.

From
Add to cart

The LV Foamer is a low volume foam applicator for projecting foaming chemicals on to small objects or tight areas while minimizing overspray.

This venturi injection system uses city water pressure (35 – 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the hose and fan nozzle on to any surface up close or at distances up to 9 feet.

.

From
Add to cart

The LC Foamer is a medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a distance. It is ideal for food plant sanitizing.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet.

It includes stainless steel mounting bracket, machined polypropylene foamer body, 20 color-coded precision metering tips to set dilution ratios, and 40' discharge hose, stainless steel discharge ball valve, polypropylene foam wand and fan nozzle.

From
Add to cart

The LC Foamer With Gauges is a medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a distance.

Foam throw distance up to 2.7m – covers up to 46.5 sq meter in 2 seconds. It requires 5L/m @ 35-125 psi water – 70-170 L/m compressed air. This venturi injection system uses city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet. Gauges display incoming water and air pressure.

 

From
Add to cart

The Portable 2-Wheel 20 Gallon HV Foamer is a high volume foam applicator featuring a 2-wheel, all stainless steel cart assembly with a 20 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).
From
Add to cart

The Portable 20 Gallon HV Foamer is a high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 20 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).
From
Add to cart

The Portable 40 Gallon HV Foamer is a high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 40 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).
From
Add to cart

The Portable 60 Gallon HV Foamer is a high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 60 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).

It requires 4-16 CFM compressed air @113-453psi pressure, 15 litres p/m @ 40 psi water pressure. 

Lafferty Portable 60 Gallon Super HV Foamer

VO07916960
From
Add to cart

The Portable 60 Gallon Super HV Foamer is a very high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 60 gallon chemical concentrate tank.

This venturi injection system uses city water pressure (30 - 150 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. An incredible amount of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and foam nozzle on to large surfaces and high ceilings at distances up to 45 feet.
From
Add to cart

The HV Foamer is a high volume foam applicator for projecting foaming chemicals on to any large surface.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 15 feet (25 feet with optional zero degree nozzle). 
From
Add to cart

The Drum Mount HV Foamer is a high volume foam applicator that straps directly to a drum or tote of chemical concentrate.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability.

The foam is then projected through the discharge hose and fan nozzle on to any surface at distances up to 15 feet (25 feet with optional zero degree nozzle).

It requires 4-16 CFM compressed air @113-453psi pressure, 15 litres p/m @ 40 psi water pressure.

It includes 25.5 x 15m discharge hose, S. Steel mounting bracket, complete foaming gun & 21 colour coded metering tips. High Volume Output, Covers up to 45m2 in one minute  15 feet / 4.5m usable Foamer Throw.

From
Add to cart

The HVHC Foamer is a high volume, "high concentrate" foam applicator that will produce strong dilution ratios for the toughest cleaning jobs.

Weaker dilution ratios are achieved with metering tips. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend a high concentration of chemical concentrate into the water stream to create a very strong chemical solution.

A high volume of rich, clinging foam is created by injecting
compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 15 feet (25 feet with optional zero degree nozzle).

It includes stainless steel mounting bracket, machined polypropylene foamer body, 20 color-coded precision metering tips to set dilution ratios, 50' discharge hose, stainless steel discharge ball valve, polypropylene foam wand and fan nozzle.

From
Add to cart

The Super HV Foamer is a very high volume foam applicator for projecting foaming chemicals on to large surfaces and high ceilings.

This venturi injection system uses city water pressure (35 - 150 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. An incredible amount of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and foam nozzle at distances up to 45 feet.
From
Add to cart
The Drum Bung Mount LCSS Foamer is a drum-mounted, medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a
distance.
This stainless steel venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet.
From
Add to cart
The Drum Mount LC Foamer is a medium volume foam applicator that straps directly to a drum or tote of chemical concentrate.
This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the hose and fan nozzle on to any surface up close or at distances up to 12 feet.