– 10 litre GO H2O Pro De-ionisation System (WWGOH2OPRO_12.5) on All-In-One trolley with detergent dispenser and removable compact hose reel & 80m 14mm hose. Featuring the new ‘McLennan’ head with ergonomic handle and ports for multiple outlets. Premium reinforced, durable 14mm hose on a lightweight metal reel that can be mounted on your DI trolley or used lift & carry.
– 5L Wash & Rinse detergent (WWESYSQLF5). Specially formulated for use with the DI System, this Wash & Rinse detergent is low foaming and will rinse naturally as you clean, taking no longer to apply than pure water. Pre-diluted with pure water to give you a spot-free finish. The cleaning power you need when water fed cleaning
– 10 litres Mixed Bed Resin. Premium, long-lasting Thermax resin to remove dissolved solids and dry spot-free
– 7″ 5 Micron Carbon Pre-filter (WWFLTCRBGOH2O_7). To maximise resin exchange capacity
– 6m (20′) Aero CAD Attack Pole (WWAEROATTCAD6)– 6 section, non-round, 100% carbon, incredibly compact, super strong and light unidirectional carbon fibre pole*. The perfect pole for 1-2 storey residential and commercial work, climbing ladders and working in confined spaces. 1.23m closed length! Featuring removable clamps and sections and Kevlar wear pads under all clamping points.
– 10″ Vikan Soft Brush Designed for maximum filament contact with the glass, a brush that works like a scrubbing pad. Incredibly light with maximum scrubbing power. Easy rinse
– 14″ Microfibre Pad WAVE a unique tool which enables water to come out over a microfibre pad. Often miscrofibre pads will have more surface area contact, so they can expediate the workload.
– TDS meter (WWCSTDS1). For checking the total dissolved solids reading of the input and output water. After running through the DI it’ll be 0, resulting in no spotting on the windows or panels
– Inline Pressure Gauge (WWCSPGRM15). Sturdy metal gauge that will measure water pressure up to 150psi
– Hose leader (WWHOSLEAD). To connect DI system to the hose reel– 9m Pole Hose (WWCSHPU5.3MMX1). Runs through the middle of your pole to ensure no snagging
– Pole Hose Valve to Pushfit Connector (WWCSPHTPFC). Control the flow of water at the base of your pole without having to go back to your water source or DI system. Heavy duty!
– 8mm Joiner (WWCSQCJ8X8). Leave your pole hose in the pole when you pack up, saving you time in feeding pole hose through the pole each time you set up.
– Wiel-Loc Angle Adapter (WWLANGAD). Angle your brush head for the desired reach for hard-to-get windows or back panels. 10″ reach with ability to use on any brush socket or pole end and add two arms
– Wiel-Loc Swivel Adapter Arm (WWLSAA). Secondary arm with smooth pivoting, self-centralising action, enabling you to swivel your brush head to keep pressure on the glass evenly, even when standing off-centre from the glass.
– Wiel-Loc to Universal Cone (WWLUNICONE). Connect traditional window cleaning tools to your water fed pole and angle adapter.
– Scrub Bar w/ Doodlebug Pad (WWCSSCRUB). Scrub bar to connect to the other arm of your Wiel-Loc Angle Adapter. Flip your brush around when you need an abrasive scrub. Can be fitted with bronze wool pads too.
* only the very best poles use multi-layered unidirectional carbon fibres for maximum strength to weight ratio and durability
