Behind the Mirror System Stainless Steel Cabinet with Frameless Mirror

Add to cart
  • Description
  • More
  • Specifications

Behind the Mirror (BTM) is designed with elegance and safety in mind, concealing consumables in a cabinet made from type 304 stainless steel. The cabinet features a mirrored door with back-lit icons that indicate functions provided from the bottom panel of each module.

Mirror is made from 6 mm thick frameless tempered glass with pencil edges and eased corners with SS sheet intermediate stiffener and SS back plate with integral welded support mounts, hinge and lock keeper.

The mirrored door is attached to the cabinet using a full width 4.8mm diameter concealed piano hinge and is secured shut using a tumbler lock and key. Support for mirror door is provided by twin damped gas springs to assist opening from 15° to 90° with soft-stop cushion at full open and when lowering to full closed position for locking.

This wall mounted stainless steel cabinet conceals a hands-free automatic liquid soap dispenser with a 1.5 L capacity and a high-speed hand dryer (208-220V) equipped with a HEPA filter.

Mirror back-lights operate on 100 – 240 VAC provided to quad (double-duplex) outlet (by others) concealed behind the cabinet into which a standard appliance power cord and AC adaptors are plugged into at installation.

Mount unit on wall using twelve (12) № 12 self-threading, pan-head screws (by others) through two (2) concealed mounting plates into appropriate anchoring and wall reinforcements and hang unit on hooks
on mounting plates. Install two (2) №12 self-threading locking screws (by others) into appropriate anchoring to prevent unit from being lifted off hanger hooks. Suggested mounting height is to position bottom of
module 406 to 508mm above vanity top. See complete Installation Guide before starting installation.

Towels are self-feeding until supply is depleted from manually loaded stack. Towel stack is replenished on cycle determined by maintenance needs. Use MFTA-2 with Z-Fold (Multi-Fold) towels, placed in towel chute with rounded lips down. Remove MFTA-2 when using C-Fold towels and store inside cabinet next to towel chute. Hand dryer operates automatically when hands or objects are placed within sensor zone. HEPA filter is changed on cycle determined by maintenance needs for models with hand dryer. Liquid soap with a pH in range 7±1.5 and viscosity range 100~3000 cP (mPa•s) is refilled into tank on cycles determined by maintenance needs. Locked compartment prevents unauthorized access or removal. See Owner Manuals for complete
details of operation.

WARRANTYTwo years for the cabinet and soap dispenser and 5years for the hand dryer* (*first year parts & labour,remaining 4 years parts only).

Viscosity Range 100 – 3000
pH Range 5.5 ~ 8.5