Mirror Stainless Steel Inter - Lok Angle Frame Vinyl Backed - Plate Glass

Add to cart
  • Description
  • More

19 x 16 mm roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. Mirror is vinyl backed and installed on a concealed hanging bracket that locks onto top and bottom of frame by tamper-proof set screws.

Back plate is one-piece, attached to frame with theft-resistant locking device. See chart for standard sizes.

MATERIALS
Frame: alloy 18-8 stainless steel, grade 304, 18 gauge. Unitized all welded construction. Exposed surfaces have satin finish. Edges and corners are burr free. All glazed mirrors are warranted against silver spoilage for 15 years. Filler: Expanded polyethylene microcell foam
sheet material, abrasion resistant and shock absorbing, water resistant, 3mm total layer thickness.

INSTALLATION
Install bracket level and plumb as per diagram location using No. 10 self tapping screws (supplied by others). Hang mirror on bracket and tighten locking screws at top and bottom. For mounting height standards refer to current Building Code of Australia for able bodied
and/or disabled use.

OPTIONAL REFLECTIVE SURFACES
Suffix Description:
B Tempered glass 6mm polished tempered glass.
C Stainless steel mirrors grade 304 stainless steel polished to No. 8 mirror finish.
D Lexan Dura-Mir™ fabricated of 6mm polycarbonate sheet.
E Plexiglas® 6mm acrylic plastic, lightweight and shatter resistant.
L Laminated glass 6mm thick