Turbo Tuff Recessed HIgh Speed Hand Dryer

Add to cart
  • Description
  • More
  • Specifications

Fast drying, approx. 15 seconds. Operates automatically using infrared sensor with auto-resetting thermostat. Owner-adjustable air speed & temperature and on/off heating options.

Dryer automatically shuts off after time-out when user removes hands from sensor zone. Type 304 satin finish stainless steel cover.
Turbo-Tuff Recess Mounted Sensor Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Cover and hand drying chamber shall be 18 gauge type 304 stainless steel alloy 18-8. All exposed surfaces shall have satin finish and shall be protected during shipment by PVC film easily removable after installation. Cabinet shall be 20 gauge galvannealed steel with a 13mm wide perimeter trim to lay flush against wall and shall have concealed and captive hex screws to close cover. Motor and heating element shall have internal resetting automatic thermal protection. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded.

Direct wired by an electrician refer to Owner’s Manual (OM) and Mounting Template Installation Guide

(MT & IG) for instructions.

RECOMMENDED INSTALLATION HEIGHT from top edge of hand chamber above finished floor (AFF):
Men’s washroom 1270mm
Women’s washroom 1194mm
Children’s washroom ages 4-7 889mm
Children’s washroom ages 8-10 991mm
Children’s washroom ages 11-13 1092mm
Children’s washroom ages 14-16 1194mm
Accessible Compliant washroom 1016mm

User activates dryer by placing hands into chamber under sensor. LED in sensor array shines blue light during operation to guide user to optimal hand placement for shorter drying time. Dryer automatically shuts off after time -out or when user removes hands from sensor zone. Hand drying chamber should be cleaned (see PCM) as per schedule determined by maintenance needs to maintain aesthetic appearance and hygienic conditions.

Electrical Supply AC, 220–240V 50/60Hz, 1000 Watt, 3-4A
Motor 500 Watt, Brush Type, Dual Ball Bearings
RPM 22,000 - 29,000 (adjustable)
Element 275-500 Watt (adjustable)
Air Speed 199-296 km/hr (adjustable)
Noise Level 69.2 – 69.3 dB-A
Drying Time Approx. 15 seconds
Weight 6.6kg (Shipping 8.2kg)
Electrical Safety Requirements  AS/NZS 60335.2.23:2004
Protection Category IP24