Taski Swingobot 2000 Scrubber Drier for Hard Surfaces

Add to cart
  • Description
  • More
  • Specifications

Cleaning just got easier with Taski Swingobot 2000 Scrubber Drier for both rough and tiled floors as well as vinyl that reaches at least 25% more productivity than its robotic predecessor Taski Swingobot 1650. It is the best class robotic solution, with a combination of Intelligent solutions and the latest technologies available on the cleaning market.

The robotic scrubber drier contains all the Intelli-features that TASKI traditional range offers, while the robot is equipped with the latest telemetry system on-board to ensure the software communicates continuously with the various sonars, laser and other sensors. This helps the robotic scrubber drier to navigate safely within facilities. The robotic mode allows operational cost savings up to 70% helps to have continuous site activity and ensures the same quality of cleaning day after day.

Intelligent total solution
All Intelligent solutions from TASKI are integrated in this new robotic scrubber dryer. You will find back IntelliDose, IntelliFlow, IntelliTrail and Aquastop, working with brush or Intellipads. Everything has been designed to reach the highest level of improvement in total cost of ownership.

Advanced design
Performance has only real value when safety is not compromised. TASKI SWINGBOT 2000 is the state of the art machine designed to reach a high level of productivity in autonomous mode while having zero compromise on safety. Various safety features are installed (Hardware and/or software) to ensure that the  cleaning robot works  safely in all kind of environments. Next to that, the Intelli-Trak telemetry system also ensures that all your data get safely stored in both machine and servers.

Theoretical Performance 1260 m²/h (13560 sq ft/h)
Practical performance low congestion 1050 m²/h (11300 sqft/h)
Working width 28 inch (70 cm)
Squeegee width 35 inch (90 cm)
Tank size (nominal) 23 gallon (90 l)
Sound level 70dB
Battery capacity (max) 180Ah
Battery run time Up to 4 hours
Machine weight net 252 Kg (555 lbs)
Machine weight ready for use (w/o driver) 1038 lbs (471kg)
Dimensions (L x W x H) 53 x 35 x 50 inches
(135 x 90 x 128.5 cm)
Turning cycle 1.4 m(4.6 f)
Brush system 2 units x 14 inches (2 x 35 cm)
Brush pressure 42.5 kg (93.69 lbs)
Working speed 0.62 m/h (1.8 km/h)
Brush drive motors Two 24 V VDC; 0,65 HP;150RPM; Direct Drive
Electrical protection class III
Approvals CE, CB by end of 2017