USE: Thoroughly pre-clean area to be sanitized or disinfected, allow minimum 10 minutes contact time if rinsing.
Non-rinse Sanitising (100 PPM): Add 1 sachet to 20L water
Surface Sanitising (500 PPM): Add 1 sachet to 4L water
Blood Spills (10,000 PPM): Add 1 sachet to 200ml water
Infectious Cleaning (1,000 PPM): Add 1 sachet to 2L water
Note: The pink grade of Q-SOL acts as a useful indicator as colour changes from pink to grey when bacteria persist in the system or equipment. If the solution remains pink at the end of the circulation or cleaning process this means sanitization is complete.
SAFETY: Contact with acids liberates toxic gas. Causes skin irritation. Causes serious eye irritation. May cause respiratory
irritation. Keep out of reach of children. Read label before use. Avoid breathing dust, fume, gas, mist, vapours or spray. Wash hands, face and all exposed skin thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective clothing, gloves, eye / face protection and suitable respirator.
Download Q-SOL Chlorinated Hospital Grade Disinfectant/ Sanitiser SDS