Structural assembly of body and door components shall be of welded construction. This sanitary waste bin shall be 22 gauge type 304 stainless steel alloy 18-8 with satin finish, have contoured cover finger lift relief and protected with PVC film during shipment.
All exposed surfaces have a satin finish and protected with PVC film during shipment. Waste bin full top edge is hemmed with return to inside for user and service safety. It has no exposed fastening devices or spot welded seams. It shall be screw mounted to all or partition through concealed keyhole slots provided through rear panel.
INSTALLATION:
- Hang unit on wall with 2 pre-installed № 10 x 32mm self-tapping pan head screws (by others) through the mounting keyhole slots provided into suitable wall reinforcements (by others) or 2 pre-installed № 10 x 19mm self-tapping pan head screws (by others) through the mounting keyhole slots provided into metal partition.
- For mounting height standards refer to current Building Code of Australia for able bodied and/or disabled use.