Structural assembly of body and door components shall be of welded construction.
All exposed surfaces shall be No. 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
The unit is surface mounted on a wall or partitioned using five No. 10 self-tapping screws (supplied by others). For mounting height, standards refer to current Building Code of Australia for able-bodied and/or disabled use.
Towels are self-feeding until supply is depleted. The unit may be refilled with a partial load in-place and will continue to feed properly. Low level of towel supply is indicated from 30% capacity to approximately 15% level.