Peerless Green Cutters Cutting Compound

Add to cart
  • Description
  • More

Green cutters cutting compound, machine grade green cutters used to restore old chalked and faded vehicle paint surfaces.

Also used for cutting back acrylic lacquers, baked and synthetic enamels, fibreglass boats and caravans.

It is designed for use by professionals in production panel shops and used vehicle detailers. It cuts and polishes in one operation. It is for use ate re-sprays. Available in 1.5kg, 6kg, 25kg, and 280kg.
It is recommended that Machine Grade CUTTING COMPOUND is broken down with water to a creamy consistency and if necessary or preferred, a fine mist water spray can be used during buffing.    

Apply the product to the vehicle surface, buff evenly with high-speed buffing machine using either lambswool or foam pad and continue until all panels are completed. 

To use by hand, apply directly onto cheesecloth and rub on the surface with an even pressure in a circular motion.  Polish when dry with a clean dry cloth. 

Dusting and dry film can be removed with water spray. This product does not contain wax or silicone and will not scratch  the finest surface.     

First Aid:
Eyes: If splashed in eyes, flush with water for 15min. Seek medical advice.
Skin: Wash affected area with soap and water.
Inhalation: If mists are inhaled, remove patient to fresh air. Seek medical advice.
Swallowed: Do NOT induce vomiting. Give milk or water to dilute.  Seek medical advice
Download Cutting Compound MSDS