Actichem San Strike - Heavy Duty Foaming Bathroom Cleaner

Add to cart
  • Description
  • More details
  • Specifications

Actichem AP603 San Strike is a powerful formulation using latest technology in grease cleaning chemistry coupled with high performance scale and scum removers to form a radical power bathroom cleaner.

It removes soap scum, lime scale, stains, body oils and grime build-ups from all tiled and hard surfaces. It kills odour causing bacteria. It inhibits mould growth. It is safe to use on tiled surfaces, stainless steel and laminex.

Benefits of Actichem AP603 San Strike Sanitizing, Heavy Duty Cleaner for Washroom:

Washroom Solution – Sanstrike is the ultimate solution for removing grime, scale build-ups and soap scum and for eliminating typical mal-odours in one easy cleaning operation.
Industry and Mining – Industry and Mining changerooms & washrooms are Sanstrike’s speciality. Sanstrike has the special chemistry required to tackle the tough soiling and conditions found in these facilities.
Easy-to-Use Foaming Formula – SanStrike’s high foaming formula makes it economical and easy-to apply providing massive labour savings. The foam hangs up on vertical services providing greater coverage and extended contact times for high performance cleaning.
Eliminates Mal-odours – SanStrike employs powerful antimicrobial technology for the eradication of odour-causing bacteria and mould. Killing the odour at it’s source means that effective and long lasting deodorization is achieved.

How to Use

Read and understand ACTICHEM SAN STRIKE MSDS before use.
Pretest the cleaning solution on the surface to be cleaned to check for any substrate instability.
Do not use on marble, natural stone and acid sensitive surfaces.


Washroom and Showers:
Apply Sanstrike through a foam gun or foam generator at a dilution of 1 part to 10 Parts water.
Using a brush or scourer pad agitate areas of heavy build-up or mould.
Rinse thoroughly with potable water.
Sanstrike is equally effective when applied using a mop bucket for floors and scourer sponge for walls. Use hot water when diluting for even better chemical action.

Apply undiluted directly onto surfaces and allow 10 minutes dwell time.
Rinse thoroughly with potable water.


Squirt directly into toilet bowls and urinals for effective “Toilet Bowl Cleaner” action.


Hazardous according to the criteria of Worksafe Australia
Observe safety recommendations made on the MSDS and product label.

Sizes 5, 15 and 25 litres
Colour Light Tan
pH 1.5 to 2.5 RTU
Safety Irritant