Goosenecks | Angle Adapters and Accessories

Gardiner Adjustable Plastic Angle Adapter 3" - Resi1

WWGRDGNRES1S
Add to cart
3'' Resi neck to fit in any water fed pole, and Euro threaded end. Will slide into any clamped water fed pole. 
Lever-release angle adjuster and a 45° offset allowing for rapid angle changes. 'Hose through' for hose to come straight through the end of the pole and out the fitting.

Gardiner Adjustable Plastic Angle Adapter 6in - Resi 1

WWGRDGNRES1S6
Temporarily Out of Stock
Add to cart
6" Resi neck to fit in any water fed pole, and Euro threaded end. Will slide into any clamped water fed pole. 
 Lever-release angle adjuster and a 45° offset allowing for rapid angle changes. 'Hose through' for hose to come straight through the end of the pole and out the fitting.

 

Alpha Adjustable Plastic Angle Adapter 3in

WWADJGN03
Add to cart
3'' Female Euro to Male Euro with 'hose-through' for allowing hose through fitting, thus eliminating the need to have a hole drilled in the pole section.
Will fit on any pole with a Euro threaded end.

 

Alpha Adjustable Plastic Angle Adapter 8in 2 x 3 in

WWADJGN8
Add to cart
 
8'' Female Euro to Male Euro with 'hose-through' for allowing hose through fitting, thus eliminating the need to have a hole drilled in the pole section.
It will fit on any pole with a Euro threaded end. 2 x 3" Alpha Angle Adapters connected together to allow different angles.

Alpha Adjustable Plastic Angle Adapter 12in 3 x 3in

WWADJGN12X3
Add to cart
12'' Female Euro to Male Euro with 'hose-through' for allowing hose through fitting, thus eliminating the need to have a hole drilled in the pole section.
It will fit on any pole with a Euro threaded end. 3 x 3" Alpha Angle Adapters connected together to allow different angles.

 

Angle Adapter Thread Change 3/4in Acme to 22mm Euro

WWADJANG22EURO
Add to cart
Plastic adjustable angle adapter, from 3/4 ACME thread to 22mm male EURO end.

Angle Adapter Thread Change 22mm Euro to 3/4 Acme

WWADJANG22ACME
Add to cart
Plastic adjustable angle adapter, from 22mm female EURO thread to 3/4 ACME thread end

Gardiner Quick-LoQ Angle Adapter Resi 1

WWGRDRES1QL
Add to cart
Brand New Gooseneck System offers ease of use coupled with maximum adaptability. Resi neck to fit in any water fed pole, and Quick-LoQ end to fit any Quick-LoQ brush socket.
Lever-release angle adjuster and a 45° offset allowing for rapid angle changes. Hose through' for hose to come straight through the end of the pole and out the fitting.

Gardiner QuicK-LoQ Taper Adapter

WWGRDQLTA
Add to cart
It allows the use of traditional tools (ie. squeegee and applicator handles) to be push-fitted on to Gardiner Quick-LoQ Angle Adapters. Fits most traditional tool handles.

Gardiner Adjustable Plastic Angle Adapter 3in Swivel Head

WWGRDGNRES1SW
Add to cart
3'' Resi neck to Euro end. Will slide into any clamped water fed pole. Adjustable to angle, up and down side to side.
Lever-release angle adjuster and a 45° offset allowing for rapid angle changes. 'Hose through' for hose to come straight through the end of the pole and out the fitting.

 

Gardiner Adjustable Plastic Angle Adapter 3in Threaded End

WWGRDGNRES2S
Add to cart
3'' Female Euro to Male Euro with 'hose-through' for allowing hose through fitting. - Will fit on any pole with a Euro threaded end.

Gardiner Quick-LoQ Conversion Kit

WWGRDQLCK
Add to cart
This Conversion Kit1 will quickly convert your current Resi-Neck and Super-Lite brush to the Quick-LoQ System.
You simply unscrew your current brush socket and screw on the enclosed brush socket. Undo your current lever assembly on the Resi-Neck and replace the top arm. For use with the Gardiner Adjustable Plastic Angle Adapter (Resi 1) or the Gardiner Adjustable Plastic Angle Adapter (Threaded End).

Gardiner Quick-LoQ Brush Socket

WWGRDQLCKBS
Add to cart
For use with Gardiner's new Quick-LoQ Standard Top Arm.

Gardiner Quick-LoQ Standard Top Arm

WWGRDQLCKSTA
Add to cart
For use with Gardiner's new Quick-LoQ Brush Socket

Gardiner 0 Degree Brush Socket

WWGRDZBS
Add to cart
Zero angle socket with female Euro thread. Screw onto your brush to connect to your angle adapter or threaded end on your pole.

Gardiner Angled Head Brush Socket

WWGRDAHBS
Add to cart
45 degree angle socket with female Euro thread. Screw onto your brush to connect to your angle adapter or threaded end on your pole.

Gardiner 6 in Long Arm

WWGRDSTA
Temporarily Out of Stock
Add to cart
Turn your 3'' angle adapter into a longer, 6'' angle adapter. Male Euro threaded end.

Reach Around Adapter Kit

WWCSRAA
Add to cart
 
Reach around for Gardiner Resi Angle Adapters.

Swivel Tool Adapter

WWCSSTA2
Add to cart
 
It attaches to your brush, pad holder or other tool with Euro threaded end. Euro to Euro thread, swivel head.

Alpha 16'' Carbon Fibre Gooseneck Multifit

WWALPHACFGN16
Add to cart
 
16'' carbon fibre gooseneck for all Alpha and Gardiner water fed poles. Clamp any standard pole fitting to the top. Can be used with the Gardiner Adjustable Angle Adapter 3" and Quick Release Euro Thread Pole End.

Alpha Carbon Fibre Gooseneck and Pole Extension

From
Add to cart
 
Eextension on your gooseneck for extra reach, or pole for extra length. To fit the Alpha Telescopic Carbon Gooseneck or any clamped end Alpha or Gardiner pole. Available in  18", 24"  and 30".

Alpha Aluminium Gooseneck 24in

WWALPHAGN24
Add to cart
 
Strong, anodised aluminium with secure connection. Long gooseneck. To fit with threaded end poles (extension poles, ReachPro). Poles can be adapted with Quick Release Pole Ends.
Add to cart
The ultimate versatile angle adapter. It can be adapted to use with any water fed window cleaning pole or brush.
With a 15cm (10") arm when fully connected, it's already got better reach than your 3" angle adapter. Can be extended up to 90cm with a gooseneck arm.

This Wiel-Loc angle adapter is definitely for you if you:
- Got a pole with a top clamp
- Got a pole with a threaded end
- Got a brush with a threaded socket
- Got a brush with a square socket
- Want to add a gooseneck arm to your angle adapter
- Want more reach than a standard angle adapter
- Want to use one angle adapter for your range of brushes/poles
- Want to connect two tools/brushes to the one adapter

From
Add to cart

Carbon fibre gooseneck arm for use with the Wiel-Loc Angle Adapter.

Now available only in 100cm (39") arm length.

Use the Wiel-Loc Click Extension (WWLCLICK) for substituting the shorter extension arms.

Add to cart
5" arm with Snap Lock end, compatible with square sockets.

Wiel House

WWLWH
Add to cart
Sturdy nylon/glass hub to hold up to two Wiel-Loc Arms
Add to cart
Adapter to connect a square fitting to a Euro thread brush
Add to cart
Adapter to connect Euro thread to square socket. Use with Euro threaded poles to Snap Lock Angle Adapter
Add to cart
Connect top-clamped poles to Snap Lock Angle adapters
Add to cart
Square socket to quickly interchange brushes. Compatible with any water fed brush without molded socket
Add to cart
Euro threaded socket. Compatible with any water fed brush without molded socket
Add to cart
Use as second component in Snap Lock Angle Adapter when not using a second arm
Add to cart
Stainless steel bolt and ergonomic thumb nut for use with Snap Lock Angle Adapter
Add to cart
Euro thread to universal to connect to any handles, t/bars and brushes, complete with Ettore Pin-Loc for Ettore products
Add to cart
Acme thread to universal to connect to any handles, t/bars and brushes, complete with Ettore Pin-Loc for Ettore products

Gardiner Quick Lock Angle Adaptor Extender

WWGRDQLAAE
Add to cart
Brand New Gooseneck System offers ease of use coupled with maximum adaptability
Add to cart

You can transform your Wiel-Loc Angle Adapter into a smooth pivoting swivel adapter with the Wiel-Loc Swivel Adapter Arm.

Heavy-duty, self-centralising, smooth pivoting swivel adapter arm to be used with the Wiel-Loc Angle Adapter, allowing you to put pressure on the brush evenly, even at heights or when standing off-centre from the glass.

Use as the primary arm on your Wiel-Loc Angle Adapter or as a secondary arm.

Add to cart

Rust-resistant, non-corrosive bronze wool pads to be used a substitute for steel wool.  It has 0000 grade.

Add to cart

This non-rusting bronze wool pad is a great substitute for steel wool. Use hand-held or attach to your pad holder.

Bronze wool pad features:

Finest bronze wool fibres with soft synthetic fibres in a composite textile
Ideal for polishing fine wood finishes, cleaning glass and brightening dull metal surfaces
Re-usable and are designed to easily produce and maintain a professional looking finish
The combination of fine grade bronze wool with the soft synthetic fibres reduces the risk of cutting too deeply into a fine finish, while still achieving the gloss level desired with minimal effort.

Add to cart

Abrasive, 0000 grade steel wool sleeve to fit with any 10″ T-Bar. It is ideal for stubborn dirt, bird droppings, bug marks, grease and oil.

Abrasive but ultra-fine grade means no scratching.

Add to cart
12.5cm (5″) extensions for your Wiel-Loc Angle Adapter. You can add multiple on top of each other to extend to your desired reach.

Extend your reach to 25cm with one.
Extend your reach to 40cm with two.
Extend your reach to 52cm with three.

If you want to go farther, use the Carbon Fibre Gooseneck Extension for Wiel-Loc Angle Adapter.