Automotive Cleaning Chemicals and Compounds

Septone Wax & Grease Remover is a pre-painting unique blend of solvents which effectively removes silicone, wax, polish, grease, oil, tar and road grime from a vehicle's exterior paintwork.

Septone Tyre Sheen is a water-based tyre rejuvenator treatment designed for fast, easy one-step application by atomiser spray to tyres.

Septone TW20 Truck Wash is a non-toxic, non-caustic, biodegradable heavy duty detergent with a balanced pH and is highly effective in removing dirt, mud, road grime, oil and exhaust soot.

Superclene is a heavy duty general purpose cleaner/degreaser concentrate possessing quick break properties.

Septone Super Etch Primer is a single pack acid etch zinc phosphate primer.  It protects the metal from surface rust prior to painting with either enamel or acrylic top coats. Super Etch Primer is chromate free. 

Septone Stone Shield is a heavy bodied, water based elasticised coating which provides excellent resistance against stone chip damage to the lower body sections of motor vehicles.

Septone Spray Putty is a quick drying putty designed to be applied over Septone Primer Surfacer.

Septone Acrylic Satin Black is a fast drying acrylic satin black finish, designed to be used for small touch-ups and repairs.

Septone Rust Shield is designed to inhibit the formation of rust on the undercarriage sections such as floor pans, firewalls, chassis members and wheel arches etc of motor vehicles, caravans and trailers.

Septone Rust Prime converts rust to a inert black compound and primes and seals metal surfaces ready for subsequent priming and top coating. It will provide temporary protection against rust, but should not be considered as a corrosion resistant coating.

Septone Rust Converter is a concentrated phosphoric acid based rust converter, used as a pre-painting treatment for converting surface rust (iron oxide) into iron phosphate, which forms an ideal base for further protective coatings.

Ripper Vehicle Detailing Cleaner from Septone is a biodegradable, concentrated detergent based cleaning product fortified with powerful builders.

This high build Primer Filler has been designed to be used under acrylic lacquer, nitrocellulose and enamel paint systems.

Septone Plastic Primer Filler is a rapid drying, highly flexible, easy sanding, high build grey primer for plastic bumpers and most rigid plastic components.

Septone Plastic Adhesion Primer is a clear, rapid drying adhesion promoter suitable for unpainted plastic components.

Septone Parts Wash Equipment Cleaner is an economical solvent cleaner especially suited for use in industrial parts washers.

Septone Oilsolve Heavy Duty Degreaser is a 100% active quick break solvent based emulsifiable degreasing cleaning fluid.

Septone Methylated Spirits is a general purpose solvent cleaner which may be used for a number of purposes around the workshop or home.

Metal Tech  from Septone is a stainless steel and fibreglass reinforced patching compound designed for use in the repair of holes, cracks, dents and rust outs in motor vehicles, caravans, trailers, boats and guttering.

Septone Metal Polish is suitable for use on a variety of metal surfaces, such as Chrome, Stainless Steel, Nickel, Brass, Copper and Aluminium. It will clean, polish and help protect the metal surface from staining and oxidation.

Septone Magic Shine protects, revives and beautifies leather, vinyl, rubber and plastics by producing a deep wet-look long life gloss that restores the natural shine, feel and colour of the original material.

Septone Heavy Duty Degreaser is a 100% active quick break solvent based emulsifiable degreasing cleaning fluid.

Septone Acrylic Gloss White is a fast drying acrylic white finish, designed to be used on motor vehicles for small touch-ups and repairs.

Septone Gloss Black Acrylic forms a high initial gloss and polishes to a deep full gloss finish. Produces a hard and durable finish.

Septone Deodorised Fish Oil is a deodorised corrosion preventative designed to inhibit the formation of rust in internal box sections, door cavities, sills and pillars of motor vehicles, as well as on structural steel, railings, gates, bridges, pontoons and for the protection of welds.

Septone Glass Fibre Filler (Fibre Tough) is a high quality fibre reinforced polyester putty designed for trade use. It is dependable and easy to use and is formulated to bridge holes up to 50mm in diameter in rusted metal panels in motor vehicles, caravans, trailers and boats and in guttering. 

Septone Edge Ultra Sand is the next generation in superior quality body fillers, formulated using the latest technology. It provides ultra superior adhesion over a wide range of substrates including steel, galvanised & zinc coated steel, SMC, aluminium and fibreglass (cosmetic repairs only).

Septone Rapid Sand Body Filler is a premium quality lightweight body filler formulated for easy application and a self-levelling smooth finish reducing panel repair time and abrasives costs.

Septone Eazefill Putty, a high quality polyester filler designed for trade or handyman use in the filling of holes, cracks and splits in timber, damaged wall paneling, masonry guttering, furniture and other repairs around the house.

Septone Degrease-it is a concentrated, solvent-free, phosphate-free, biodegradable water based degreaser.

Septone Concentrated Car Shampoo is a non-toxic, non-caustic, biodegradable, high foaming car washing detergent with a neutral pH.

Chassis Black is an anti-corrosive black bituminous coating for the undercarriages of motor vehicles, caravans and trailers, for iron roofs, for guttering and for metal structures.

Septone's Car filler is a high quality lightweight polyester body filler designed for trade or handyman use in the filling of dents, cracks, holes or gaps.

Septone Brush-On Seam Sealer is a fast drying brushable sealant applied over exposed seams and joints which have been welded, riveted or bolted.

Septone Brushcote Body Deadener is a waterproof, anti-corrosive, noise suppressing black bituminous compound designed for application by brush to the underside of motor vehicles.

Septone Brake Dust Cleaner quickly removes brake dust, brake fluid, grease, oil and other contaminants from brake discs, drums, pads and linings.

Septone Blue Heeler Truck Wash is a non-toxic, non-caustic, biodegradable heavy duty detergent with a neutral pH and is highly effective in removing dirt, mud, road grime, oil and exhaust soot.

Septone Blade Putty is supplied ready for use, and is applied using a glazing knife or plastic putty bat. It is a heavy bodied single pack nitrocellulose based putty for automotive and industrial use. Suitable for use under acrylic paints.

Septone Armour Cologne Rejuvenator protects, revives and beautifies leather, vinyl, rubber, acrylics and plastics by restoring the natural shine, feel and colour of the original material.

Aluminium Cleaner is a highly effective etching type acid cleaner designed primarily for the cleaning of aluminium in industrial situations.  It is most commonly used on aluminium trailer bodies (pantechnicons), tanks, bull bars and dinghies. 

Septone All Purpose Thinner is formulated for thinning Acrylic and Nitrocellulose Lacquers, Primer Surfacers and other products requiring an Acrylic or Lacquer Thinner.

Septone Ali Brite Aluminium & Stainless Steel Cleaner is a highly effective etching type acid cleaner designed primarily for the cleaning of aluminium in industrial situations.

Septone Acrylic Primer Surfacer is a fast drying single pack primer surfacer designed for spot and panel repairs to motor vehicles and for complete resprays of motor vehicles with enamel or acrylic lacquers.

Septone Acrylic Matt Black is a fast drying acrylic matt black finish, designed to be used for small touch-ups and repairs.

Septone Acetone Cleaning Solvent is an extremely versatile solvent and has excellent solvency power for resins, gums, fats, oils, waxes, rubber, plastics, nitrocellulose, paints, lacquers, varnishes, adhesives and rubber cements.

2K Tech 2k Body Filler can withstand temperatures of up to 80 degrees in automotive low bake ovens. 2K Tech exhibits excellent non-bleed performance even under 2 pack base coat / clearcoat paint systems.

Mr Buff is an excellent paste cutting compound suitable for automotive, marine and general industrial applications. It is used on new paints to take away overspray and orange peel or on chalked paints to remove fine scratches and oxidation and to bring back the shine to dull surfaces.