Laquer and Primer

Add to cart

Septone Gloss Black Acrylic forms a high initial gloss and polishes to a deep full gloss finish. Produces a hard and durable finish.

Acrylic Gloss Black is a fast drying acrylic black finish which is designed to be used on motor vehicles for small touch-ups and repairs.

It may safely be used over properly prepared substrates like degreased and well sanded acrylic lacquer, 2-Pack enamels, Primer Surfacer and Primer Filler.
Add to cart

Septone Acrylic Gloss White is a fast drying acrylic white finish, designed to be used on motor vehicles for small touch-ups and repairs.

It may safely be used over properly prepared substrates like degreased and well sanded acrylic lacquer, 2-Pack enamels, Primer Surfacer and Primer Filler. Forms a high initial gloss and polishes to a deep full gloss finish. It produces a hard and durable finish.
Add to cart

This high build Primer Filler has been designed to be used under acrylic lacquer, nitrocellulose and enamel paint systems.

It offers excellent build and sanding qualities as well as first-class adhesion to bare metal (however the use of etch primer is advised over difficult metals such as aluminium and zinc.) May also be used over polyester body filler, fibreglass etc.
Add to cart

Septone Plastic Adhesion Primer is a clear, rapid drying adhesion promoter suitable for unpainted plastic components.

It is ideal for use on most plastic automotive body parts and other non-automotive plastic components. Do not use on soft vinyl surfaces.

NOTE: For priming and filling of repairs to plastic bumpers and components use Septone Bumper Prime.

Add to cart

Septone Plastic Primer Filler is a rapid drying, highly flexible, easy sanding, high build grey primer for plastic bumpers and most rigid plastic components.

 it is ideal for priming repaired areas and minor imperfections.
Add to cart

Septone Acrylic Primer Surfacer is a fast drying single pack primer surfacer designed for spot and panel repairs to motor vehicles and for complete resprays of motor vehicles with enamel or acrylic lacquers.

 It exhibits excellent build and sanding properties, with excellent adhesion to bare metal and good holdout under enamels and acrylic lacquers.

Primer Surfacer may be applied to bare steel for small areas, but an initial coat of Septone Etch primer is recommended. For other metals such as aluminium, zinc anneal, zincalume, galvanised iron or stainless steel, an initial coat of Etch Primer is essential. Suitable substrates to which Primer Surfacer may be applied include OEM paints, fibreglass, body fillers, bare steel (as above) and Etch Primer.

From
Add to cart

Septone Super Etch Primer is a single pack acid etch zinc phosphate primer.  It protects the metal from surface rust prior to painting with either enamel or acrylic top coats. Super Etch Primer is chromate free. 

It provides excellent adhesion to most metals including mild steel, aluminium, zinc anneal, galvanised iron, stainless steel, lead, brass and copper. It provides excellent anti-corrosive properties and is chromate free.

Septone Super Etch Primer is available in 400g aerosol, 1L and 4L.
From
Add to cart

Septone Stone Shield is a heavy bodied, water based elasticised coating which provides excellent resistance against stone chip damage to the lower body sections of motor vehicles.

Once dry, it forms a durable, flexible coating with a high opacity stippled black surface finish which is ready to be topcoated with the appropriate finish coats.
It is designed to be used on areas such as front aprons and air dams, stoneguard panels, wheel arches, etc. Luggage compartments and other areas subject to damage may also be applied with Stone Shield prior to topcoating. Stone Shield is designed to be used to repair textured finishes on both local and imported vehicles.

Available in grey, black and white - 1L tall tin and 400g aerosols.