Lafferty Wall Mounted Foaming Dispensers

From
Add to cart

The Portable 20 Gallon HV Foamer is a high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 20 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).
More details
From
Add to cart

The Portable 40 Gallon HV Foamer is a high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 40 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).
More details
From
Add to cart

The Portable 60 Gallon HV Foamer is a high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 60 gallon chemical concentrate tank.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle on to any surface up close or at distances up to 15 feet (25 feet with optional zero degree nozzle).

It requires 4-16 CFM compressed air @113-453psi pressure, 15 litres p/m @ 40 psi water pressure. 

More details

Lafferty Portable 60 Gallon Super HV Foamer

VO07916960
From
Add to cart

The Portable 60 Gallon Super HV Foamer is a very high volume foam applicator featuring a 4-wheel, all stainless steel cart assembly with a 60 gallon chemical concentrate tank.

This venturi injection system uses city water pressure (30 - 150 PSI) to draw and blend chemical concentrate from the tank into the water stream to create an accurately diluted solution. An incredible amount of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and foam nozzle on to large surfaces and high ceilings at distances up to 45 feet.
From
Add to cart

The HV Foamer is a high volume foam applicator for projecting foaming chemicals on to any large surface.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 15 feet (25 feet with optional zero degree nozzle).
 
More details
From
Add to cart

The Drum Mount HV Foamer is a high volume foam applicator that straps directly to a drum or tote of chemical concentrate.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability.

The foam is then projected through the discharge hose and fan nozzle on to any surface at distances up to 15 feet (25 feet with optional zero degree nozzle).

It requires 4-16 CFM compressed air @113-453psi pressure, 15 litres p/m @ 40 psi water pressure.

It includes 25.5 x 15m discharge hose, S. Steel mounting bracket, complete foaming gun & 21 colour coded metering tips. High Volume Output, Covers up to 45m2 in one minute  15 feet / 4.5m usable Foamer Throw.

More details
From
Add to cart

The HVHC Foamer is a high volume, "high concentrate" foam applicator that will produce strong dilution ratios for the toughest cleaning jobs.

Weaker dilution ratios are achieved with metering tips. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend a high concentration of chemical concentrate into the water stream to create a very strong chemical solution.

A high volume of rich, clinging foam is created by injecting
compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 15 feet (25 feet with optional zero degree nozzle).

It includes stainless steel mounting bracket, machined polypropylene foamer body, 20 color-coded precision metering tips to set dilution ratios, 50' discharge hose, stainless steel discharge ball valve, polypropylene foam wand and fan nozzle.

More details
From
Add to cart

The Super HV Foamer is a very high volume foam applicator for projecting foaming chemicals on to large surfaces and high ceilings.

This venturi injection system uses city water pressure (35 - 150 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. An incredible amount of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and foam nozzle at distances up to 45 feet.
More details
From
Add to cart

The Drum Bung Mount LCSS Foamer is a drum-mounted, medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a distance.

This stainless steel venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet.
More details
From
Add to cart

The Drum Mount LC Foamer is a medium volume foam applicator that straps directly to a drum or tote of chemical concentrate.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the hose and fan nozzle on to any surface up close or at distances up to 12 feet.
More details
From
Add to cart

The A-50 Airless Foamer is a medium volume foam applicator for projecting foaming chemicals on to any surface up close or at distances up to 8 feet without compressed air.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the discharge hose to the airless foam wand which draws in atmospheric air to create and project wet, clinging foam.

Lafferty Airless Foamers do not require compressed air, eliminating cost and equipment adjustment issues. Foam is created instantly by the venturi airless foam wand. Choice of two flow rates provides for quick area coverage for small or large applications. Foam throws distance of up to 8 ft. for A-25 models and up to 10 ft. for A-50 models — Increased water pressure will increase foam throw.

It includes stainless steel mounting bracket, stainless steel inlet and discharge ball valves, machined polypropylene injector body, 20 color-coded precision metering tips to set dilution ratios, 50' foam hose & machined polypropylene airless foam wand.

It is ideal for Agriculture/Horticulture, animal health, vehicle wash, dairy, food & beverage, hatchery, industrial, metal Processing, Pharm/Bio, Supermarkets and many other Applications! 

More details
From
Add to cart

The Portable A-25 Uni-Body Airless Foamer is a medium volume foam applicator featuring an all stainless steel cart assembly.

 It will project foaming chemicals on to any surface up close or at distances up to 6 feet without compressed air. This venturi injection system uses standard city water pressure (35 -125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the discharge
hose to the airless foam wand which draws in atmospheric air to create and project wet, clinging foam.

Lafferty Airless Foamers do not require compressed air, eliminating cost and equipment adjustment issues. Foam is created instantly by the venturi airless foam wand.

Choice of two flow rates provides for quick area coverage for small or large applications. Foam throws distance of up to 8 ft. for A-25 models and up to 10 ft. for A-50 models —
Increased water pressure will increase foam throw.

Attachments: discharge Hose 19mm x 7.5m + complete Foaming Gun & color-coded metering tips for up to 21 dilution ratios.

More details
From
Add to cart

The 3-Way Acid LC Foamer is a foam applicator for applying 3 highly corrosive chemicals such as those used to remove concrete and for aluminum brightening.

Draw concentrate directly from the chemical container and accurately dilute it to the require ratio. This acid-resistant venturi injection system uses standard city water pressure (40 - 125 PSI) to draw and blend concentrated acid into the water stream to create a highly concentrated and accurately diluted solution.
More details
From
Add to cart

The 1-Way Acid LC Foamer is a foam applicator for projecting highly corrosive chemicals such as those used to remove concrete and for aluminum brightening.

This acid-resistant venturi injection system uses standard city water pressure (40 - 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose, extended wand and fan nozzle at distances up to 12 feet.

It requires 5L/m @ 35-125 psi water ● 70-170 L/m compressed air.

Attachment: Discharge Hose 19mm x 15m + complete foaming Gun & color-coded metering tips for up to 21 dilution ratios

Please click the image for the installation diagram.

More details
From
Add to cart

The 1-Way Acid Airless Foamer is a foam applicator for applying highly corrosive chemicals, such as those used to remove concrete and for aluminum brightening, without compressed air.

This acid-resistant venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution. The solution then flows through the discharge hose to the "airless" foam wand which
draws in atmospheric air to create and project wet, clinging foam on to any surface.

It requires water Flow 7.5 LPM @ 35-125 psi pressure.

Attachments: Discharge hose 19mm x 15m assembly with PVC ball valve & airless foam wand + Color-coded metering tips for up to 21 dilution ratios

More details
From
Add to cart

The 2-Way Acid Airless Foamer is a 1.3 GPM @ 40 PSI foam applicator for applying 2 highly corrosive chemicals, such as those used to remove concrete and for aluminum brightening, without compressed air.

This acid-resistant venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution. The solution then flows through the discharge hose to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam on to any surface. Use the chemical ball valves to inject the 2 chemicals separately or simultaneously.

It requires Water Flow 7.5 LPM @ 35-125 psi pressure.

Attachments: Discharge hose 19mm x 15m assembly with PVC ball valve & airless foam wand + Color-coded metering tips for up to 21 dilution ratios

More details
From
Add to cart

The 3-Way Acid Airless Foamer is a foam applicator for applying 3 highly corrosive chemicals, such as those used to remove concrete and for aluminum brightening, without compressed air.

This acid-resistant venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution. The solution then flows through the discharge hose to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam on to any surface. Use the chemical ball valves to inject the 3 chemicals separately or simultaneously. Apply Acid based chemicals to spray & Foam it for quick coverage.
More details
From
Add to cart

The Model 20 SS Bypass 2-Way Airless Foamer/Sprayer is a high pressure wash/rinse system for quickly applying two chemicals and rinsing through the same hose.

Using a 3 - 6 GPM pressure washer, this stainless steel venturi injection system draws and blends 2 chemical concentrate into the water stream to create an accurately diluted solution. The solution is then projected through the discharge hose and foam wand where it draws in atmospheric air to create wet, clinging foam. Use the spray nozzle to apply non-foaming chemicals and simply open the bypass ball valve to rinse at full volume and pressure.

Application: Airless foamer / sprayer is a high pressure wash/rinse system for quickly applying two chemicals & rinsing through the same hose. The system draws & blends 2 chemical concentrate to create an accurately diluted solution.
The colour-coded metering tips for up to 21 dilution ratios

More details
Add to cart

The Soft Brush Airless Foamer is a foam cleaning system that continually creates foam through the soft bristle brush. The soft bristled brush will not damage paintwork or scratch surfaces and the foam continually flushes debris from the bristles.

Very low volume, balanced output provides ideal foam volume at the brush head. Available in soft or stiff brush.

The Stiff Brush Airless Foamer is a foam cleaning system that continually creates foam through the stiff bristle brush, without the need for compressed air. Great for tough cleaning jobs. Design for use on non painted surfaces the foam continually flushes debris from the bristles.

More details
From
Add to cart

The LV Foamer is a low volume foam applicator for projecting foaming chemicals on to small objects or tight areas while minimizing overspray.

This venturi injection system uses city water pressure (35 – 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the hose and fan nozzle on to any surface up close or at distances up to 9 feet.

.

More details
From
Add to cart

The LC Foamer is a medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a distance. It is ideal for food plant sanitizing.

This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet.

It includes stainless steel mounting bracket, machined polypropylene foamer body, 20 color-coded precision metering tips to set dilution ratios, and 40' discharge hose, stainless steel discharge ball valve, polypropylene foam wand and fan nozzle.

More details
From
Add to cart

The LC Foamer With Gauges is a medium volume foam applicator for projecting foaming chemicals on to any surface up close or at a distance.

Foam throw distance up to 2.7m – covers up to 46.5 sq meter in 2 seconds. It requires 5L/m @ 35-125 psi water – 70-170 L/m compressed air. This venturi injection system uses city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 12 feet. Gauges display incoming water and air pressure.

 

More details