3M Spill Management - Spill Kits and Sorbents

3M spill kits and sorbents contain no abrasive granules that can damage expensive equipment. Instead, they are made from microfiber materials, which contain millions of tiny pockets that absorb and hold liquids.

You can choose from petroleum (oil-only), maintenance (for non-aggressive liquids), and chemical (for most aggressive and non-aggressive liquids) formats.

25 Pads/Box
Add to cart

This 3M Chemical Sorbent Pad is a highly absorbent pad that has a low-profile design and can be easily placed in tight areas. It is ideal for small spill management and wiping down contaminated areas.

This conveniently sized pads allow the user to quickly spread sorbent on and in the path of a spill.

For use on most aggressive (hazardous) and non-aggressive liquids. Available in a box of 25 pads. 590ml per pad.

1 Roll/Case
Add to cart

3M Chemical sorbent roll has a high capacity sorbent that can be easily cut to cover small areas or to fit tight corners. It has a scrim on one side to increase strength and help eliminate linting.

3M Chemical sorbent roll is ideal for use on most aggressive (hazardous) and non-aggressive liquids. Rolls of sorbent material are used for large spill management or in areas where spills may occur. May be used to cover bench tops in prep for a spill or as a work surface.

Each roll is 38 cm by 45 m. (117 L/roll)

Each Boom
Add to cart

3M Chemical Sorbent Mini-booms are ideal for placing around hazardous and non-aggressive liquid spills to prevent them from spreading. They work fast so you have time to ensure proper clean -up while minimizing employee exposure.

It is ideal for placement around equipment to prevent damage. The 3 inch Scrim on the outside of mini-boom contains the particulate sorbent material and identifies its use.

Each Pillow
Add to cart

3M Chemical Sorbent Pillow is ideal for placement at the source of a leak or they can be thrown into a contained
spill.  These sorbent pillows are small, lightweight, tear-resistant and feature a high capacity for holding liquid.

It is designed with a scrim that encases particulate sorbent material.

1 Box
Add to cart

3M™  Chemical Folded Sorbents are made from chemically inert polypropylene material, these folded sorbents work well with chemicals such as acids and bases as well as aqueous or hydrocarbon-based fluids.

Ideal for placement around hazardous and non-hazardous liquid spills to help prevent spreading.

Use as a boom, pillow, pad or roll. Perforations every 16 inches allow you to select the length you need. Each handy dispenser shows suggestion for sorbent use.

From
Add to cart

3M™ Oil & Petroleum Sorbents Pads and Rolls are hydrophobic (repel water), and ideal for absorbing oil and Petroleum fluids from places where water may be present. These can be used in or outside the plant.

3M™  Oil & Petroleum Sorbent Pads are reusable, conveniently-sized pads are perfect for cleaning up small oil or petroleum spills and wiping contaminated areas. They may also be used on work surfaces in anticipation of a spill. 

3M™ Oil & Petroleum Sorbents Roll offers the versatility to cut-for-use in small areas or lay full size on open waters, shorelines or discharge streams. Ideal for lining drawers, covering work benches or protecting areas from overspray. Can be wrung out and reused many times.

These high capacity sorbents are lightweight, dust free and extremely absorbent to minimize both cost and waste disposal.

Available in traditional, medium and high sorbent capacities.

From
Add to cart

3M™  Oil & Petroleum Sorbent Pads are reusable, conveniently-sized pads are perfect for cleaning up small oil or petroleum spills and wiping contaminated areas. They may also be used on work surfaces in anticipation of a spill.

These sorbents are lightweight, and have scrim on two sides to increase strength and help reduce linting. It contains at least 50 percent recycled content by weight.

Add to cart

3M Oil and Petroleum Folded Sorbent provides you with four sorbents in one. This folded product can be stocked and be used for almost any liquid spill.

It absorbs hydrocarbon-based liquids and repels aqueous-based liquids to help you recover oil, not water.

You can use it as a boom, pillow, pad or roll. Perforations every 16 inches allow you to select the length you need. Each handy dispenser shows suggestions for sorbent use spills and wiping contaminated areas, and it can be wall mounted for easy on or off-site use.

From
Add to cart

3M™  Oil & Petroleum Sorbent Booms are used to prevent the spread of liquids and are the first line in spill containment. Unlike non sorbent containment booms, ours absorb oil as they help contain it.

These sorbent booms can be linked together by built-in connectors to deploy over large areas. UV-resistant, they will not deteriorate or disintegrate. Designed for long-term use in ditches, streams, rivers, lakes, docks and piers.

Double booms feature a unique, double-cylinder design to maximize absorption and minimize the escape of oil traces in flowing water. Constructed to be more rigid for easier handling and to make it easier to turn them over for maximum saturation.

Each Boom
Add to cart

3M™  Oil and Petroleum Sorbent Mini-Booms quickly prevent leaks and spills from spreading to adjacent areas.  Great for placement around equipment to prevent damage.

It has a 3 inch scrim on the outside contains the particulate sorbent material and identifies its use.

Add to cart

3M™ Oil and Petroleum Sorbent Pillows are designed with a scrim that encases particulate sorbent. It is great for handling large quantities of light oil in confined spaces, they are UV-resistant and will not deteriorate or sink.

200 Pads
Add to cart

3M™ Oil and Petroleum Sorbent Pad Economy Performance is reusable, conviniently-sized pad that absorbs hydrocarbon-based liquids and repel aqueous- based liquids.

Each Sheet
Add to cart

This highly oil and petroleum sorbent sheet is great for easy placement in tight areas. It features a low-profile design, conveniently sized pads allow the user to quickly spread sorbent over and in the path of a spill.

These absorbent pads may also be used on a work surface in anticipation of a spill or as a wipe. Ideal for use under docks, in shallow water, rocky shorelines, marshes, and beaches.

Add to cart

3M™ Oil High Performance Workshop Spill Kit 120L is suitable for larger land based spills. With its capacity to absorb 120L, it is ideal for fuel workshops, storage areas, loading docks and manufacturing sites.

3M™ Oil HP Workshop Spill Kit contains a mix of High Performance hydrophobic (water resistant) polypropylene & Cellulose sorbent. It is highly economical providing customers with the flexibility to select additional suitable PPE based on their own hazard evaluation.

Add to cart

3M™ Oil High Performance Workshop Spill Kit 300L is suitable for larger land based spills. It is great for storage areas, fuel workshops, loading docks and manufacturing sites.

3M™ Oil HP Workshop Spill Kit contains a mix of High Performance hydrophobic (water resistant) polypropylene & Cellulose sorbent. It is highly economical providing customers with the flexibility to select additional suitable PPE based on their own hazard evaluation.

Add to cart

3M™ Oil & Petroleum Sorbent Spill Kit Cabin Bag - 25L is compact and lightweight which is designed to contain a small oil or fuel spill and can be easily stored in the cabin of transport vehicles for quick deployment.

It has the capacity to absorb 25 litres.

Add to cart

3M™ Oil & Petroleum Sorbent Spill Kit Wheelie Bin 190L is ideal for keeping handy where large spills have the potential to occur such as fuel storage areas, loading docks, manufacturing sites and other areas where fuels and petroleum liquids are present.

It has the capacity to absorb 190L. It can be reused, with 90% of the absorbent oil able to be rung out and reclaimed.

Add to cart

3M ™ Oil and Petroleum Sorbent Spill Kit Drum 45L can easily be stored and excellent for use where there is a potential for smaller petroleum and oil spills to occur. It has the capacity to absorb 45 litres.

Add to cart

3M™ Chemical Spill Response Kit Drum 35L is compact, easy to store spill response kit which is ideal for areas where smaller amounts of chemicals are shipped, stored or transferred.

It includes range of PPE. It has the capacity to absorb 35 litres. 3M™ Chemical Sorbent is highly absorbent and suitable for a wide range of liquids, even aggressive acids and alkalis.

Add to cart

3M ™ Chemical Sorbent Spill Response Pack 180L is designed for larger hazardous chemical spills, even aggressive acids and alkalis.

It includes range of PPE. It has the capacity to absorb 180L.

Add to cart

3M ™ Chemical Sorbent Cabin Bag Spill Kit 25L is a compact and lightweight kit that can be easily stored in transport vehicles for quick deployment.

It has the capacity to absorb 25L small spills. It also contains a range of PPE.

Add to cart

3M ™ Chemical Sorbent Spill Response Kit SRP-Chem is suitable for use in laboratories, universities, hospitals, shipping docks and other areas where chemical are stored or transferred. It has the capacity to absorb 17l of small spills.

From
Add to cart

3M™ General Purpose Sorbents also referred to as maintenance absorbents are great for almost any type of non-aggressive liquid neatly and efficiently. These sorbents have high absorption capacity (up to 25x their own weight) which minimises the amount of waste for disposal.

These are lightweight and very easy to deploy, and are made from inert, synthetic fibres principally of polypropylene and polyester.
3M™ General Purpose Sorbents are available in roll, pad, folded and boom formats.

For product with ** PLEASE CONTACT US FOR AVAILABILITY TIME FRAME, AS THIS MAYBE A BUY IN PRODUCT FROM AMERICA

Add to cart

3M™ General Purpose Cabin Bag Spill Kit 35L SRCB-Gen is a compact,highly visible, weather proof handy kit provides the ability to have economical response materials close to any potential hazard area and enhances your capacity to contain spills quickly and safety.

It is designed to be fitted in transportation vehicles. Ideal for recovery of small, accidental, routine leaks, unexpected spills and drips of oils, lubricants and non-aggressive liquids. It has the capacity to absorb 35L.

Add to cart

3M ™ General Purpose Spill Kit Wheelie Bin 130L - MSRK-130 is an easy to deploy, highly visible kit, medium-sized wheelie bin provides the ability to have cost-effective spill response materials. It enhances your capacity to contain spills safely and quickly.

It is designed for control of accidental and routine leaks, drips and spills of oils, lubricants and other non-aggressive liquids commonly found in workshops and liquid transfer points.

Add to cart

3M ™ General Purpose Spill Kit Wheelie Bin 210L - MSRK-210 is an easy to deploy, highly visible, larger size wheelie bin provides the ability to have cost-effective response materials close to any potential hazard area. It enhances your capacity to contain spills safely and quickly.

It is designed for control of accidental and routine leaks, drips and spills of oils, lubricants and other non-aggressive liquids commonly found in warehouses, factories and workshops.

Add to cart

3M™ Floorsweep Sorbent is an easy to apply sorbent, made of a biodegradable cellulose based material, great for indoor and outdoor general liquid spill removal on floors, roads, and other hard surfaces.

Ideal for use in warehouses, factories and shops. It can be used to absorb a wide range of fluids, including: fuels, mineral oil, hydraulic fluids, coolants and water based fluids.

Note: Not to be used with aggressive liquids including caustics, acids, oxidizers and reactive chemicals.