Are you having trouble in determining what brush to use? We provide brushes and pad holder that will give you the best possible performance and floor. The following shows the descriptions of the materials and their applications.
Union Mix: Medium Grade natural fibers for polishing finished floors with standard-speed equipment. It is recommended for use in place of white pads.
ProLite: Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from the floor. It is recommended for use place of red pads.
Magna Rit: For extreme heavy-duty scrubbing or stripping floors. This brush has extra large diameter silicon carbide grit impregnated synthetic bristles. It is recommended for use in place of black pads.
Dyna Grit: For aggressive, heavy-duty scrubbing or stripping floors. It is recommended for use in place of brown pads.
Midlite Grit: For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. It is recommended for use in place of green or blue pads.
MidGrit: For general purpose scrubbing when you need a lighter action for sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. It is recommended for use in place of green or blue pads.
AgLite Grit: For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient hard surface floors. It is recommended for use in place of red or white pads.
Short Trim Pad Holder: Made with a structural foam block and center ring for correct pad centering. It has a "shower feed" design for getting solution to the floor.
We provide brushes and pad holders that will you the best possible performance between machine and floor. Following are descriptions of the materials and their applications.
46 Grit Brush: Most aggressive grit brush. It is used primarily to clean heavily buildup on concrete floors in factories, or for heavy stripping of finish.
80 Grit Brush: Medium aggressive grit brush. Good all-around brush for medium to heavy buildup removal. Can also be used for general stripping operations.
180 Grit Brush: Least aggressive grit brush. Used for daily cleaning of hard-finished floors.
Polypropylene Brush: Standard equipment brush. Low cost, yet effective in cleaning many common floor surfaces.
Stiff nylon Brush: Cleaning action similar to polypropylene. More durable and wear-resistant than polypropylene.
Soft Nylon Brush: Least Aggressive brush available. Used on soft-finish floors where a more aggressive brush would leave scratch Marks, or in applications requiring very light cleaning.
Gum Rubber: Provides superior wiping action on tile, terrazzo, and polished floors.
Red Gum Rubber: Provides longest life on finished or unfinished concrete floors.
Polyurethane: Oil resistance provides superior life in applications with oily floors.
Truvox Multiwash transport trolley. Easy to attach and detach, fits all models. It is an essential extra if you need to move your Multiwash any distance or over rough uneven ground.
Although a Multiwash machine is easy to move and use when in use, when there is no power going to the machine it can be heavy and difficult to move. With the help of the trolley this task is made much easier. You simply set the Multiwash on to the trolley, attached the retaining strap and till the machine back using it's handle, then it is as simple as pushing a shopping cart.
© 2017 Cleaners Supermarket Pty Ltd. All Rights Reserved