Drum Taps

Shop by category
Add to cart

NX 25 Plastic Drum Pump 20/25 with anti-pumping safety strap and swivel No-drip Nozzle, is suitable for dispensing hazardous chemicals for 15 -25L containers. It uses a closed loop system for full safety during dispensing. Approximately 180 ml per stroke. It is made from Polypropylene plastic, with associated properties, making it resistant to many chemicals.

The NX25 drum pump features only 2 moving parts and delivers a low pressure at the nozzle to ensure an even distribution of the liquid is dispensed with ease. The pump gives a continuous flow and dispenses on the up and the down stroke. It is also an ideal AdBlue pump, DEF pump and is EPA compliant.

Uses: Designed for use to dispense hazardous products; various pH cleaning chemicals, chlorine based products, oils and fertilisers, and crop chemicals.
More details

Ezi-action Drum Pumps for 200L Containers

JOHH11319
Add to cart

Ezi-action Drum Pumps are the best hand drum pump for bulk containers with ease and without waste.

It is easy to use, reliable and economical, customisable and fully serviceable which makes a workplace safer and more efficient.

Add to cart

The Snap Tap is an easy and convenient tap that allows for both regulated and continuous disbursement of liquids.

We supply 3 different sizes. See images the tap threads sizes 11mm, 16mm and 25mm. The 11mm is the standard size, however it appears your customer is after the 16mm that is commonly ordered in New Zealand. We have 2 colours in the 25mm Red & Green and the 16mm tap we supply White Green & Red.
More details
Each
Add to cart

These Australian made self closing solvent resistant plastic drum taps are designed to handle solvents because of the specially designed seals, but have proven to handle most liquid chemicals except acids.

More details

Sealed Air Drum Tap In Cap For 15-25L Drums

JODHH11324
Add to cart

Tap in cap for simple dispensing of products in 15-25L drums.

Drum Tap in Cap For 15-25L Drums

JOHH11328
Add to cart
Dispensing tap 20mm for 15-25l drums with bung holes.
Add to cart
8mm Quick Serve Tap and Standard ¾ Adaptor

8mm Quick Serve (QST), and  standard 3/4” adaptor. Flow rate 72ml/sec*. Outlet rotates to orient in correct position. Use with back nut 202015 (black)**

More details
Add to cart
 

12mm Quick Serve Tap, standard ¾" adaptor

More details

Aeroflow Tap + 3/4 Bsp Adaptor (Red)

From
Add to cart

Aeroflow  (AFT),  Breather  taps  with 18mm outlet and standard 3/4” adaptor, natural rubber washer. LLDPE body, PP spigot. Use in larger rigid, single-opening containers up to 200lt. 

Nozzle reduces outlet to 12mm. Fits back nut 202015 (black)**. Outlet rotates to orient in correct position.  Flow rate 70ml/sec*.

Dispensing Chimney Cap Aeroflow 58mm Red for Metal Drums

API0011A
Add to cart
Dispensing Chimney Cap Aeroflow 58mm Red for Metal Drums

Dispensing Tap Areoflow Self Vented for 20L Cubes

AP007
Add to cart
 
Dispensing Tap Areoflow Self Vented for 20L Cubes

Dispensing Tap-Snap Action - Various Colours

AP009
From
Add to cart

Dispensing Tap-Snap Action available in various colours.

Hand Pump Dispenser the Major 250ml

AP2
Add to cart
Hand Pump Dispenser the Major 250ml

NW50 Solid Cap- German Punched

AP200006
Add to cart
 
NW50 Solid Cap- German Punched

Dispenser Tap Jumbo Hex 3/4 Inch Short Taper

AP250602
Add to cart
 

Lever Tap for 5L Jerry Containers 38mm Thread

AP258445
Add to cart

Jumbo Tap High Flow Red 3/4 Without Nut

AP250654
Add to cart

3/4 BSP Nut (Black)

AP202015
Add to cart
 

Long Parallel Thread Tap With Nut

AP350060
Add to cart

Doyle Round 4 1/2 114mm

AP372614
Add to cart
 

S60 X Connector with Water Butt Tap

AP406127
Add to cart

Rieke Dispenser Drum Tap 3/4 Inch Solvent

AP4086
Add to cart

58mm Drum Wrench - Red (Spanner)

AP5820X
Add to cart

Rieke 2 Npt Plastic Drum Tap 205L

AP9308000
Add to cart
Rieke 2 Npt Plastic Drum Tap for 205L

240L Cap to Fit Tap If Wanted

APD204
Add to cart