Disinfecting Performance:
Sansol
is a registered disinfectant, proven to kill Blood Borne Viruses such as HIV [the AIDS Virus],
and HBV [Hepatitis B Group Virus].
Sansol
is suitable for use on stainless steel and tiled or porcelain surfaces. It is a super high foaming
concentrated disinfectant with powerful cleaning ability built into the formulation.
Sansol should not be
applied to painted surfaces or metal surfaces containing aluminium, brass or copper.
Sansol
should be used neat for disinfection where blood spillages are routinely present or are at an
elevated risk of being present.
Sansol is also a powerful BACTERICIDAL cleaner and is suitable for
use where ever bacterial cross infection is a concern in pathology or functional analytical laboratories.
Sansol
is the only product proven to both KILL and clean away serious infectious viruses in those
worst case dirty situations that can sometimes be present in health care settings.
FOR FOAM CLEANSING OF HYGENIC ENVIRONMENTAL SURFACES
Cleaning Performance:
For Bathrooms and Washrooms you want to sparkle through thorough hygienic cleansing.
Using
Sansol through a foaming gun (set at dilution of 1 in 10), reduces labour costs associated with
cleaning large bathrooms and shower blocks by 50%.
Sansol represents a fundamental change in the
way hospital bathrooms can be cleaned. The super concentrated high foaming system clings to walls
and vertical surfaces. It should be left in place for several minutes and then washed off thoroughly with
running water.
The super concentrated cleaning system in
Sansol effectively removes soap scum, body fats and oils,
hard water carbonate deposits, rust and urine stains, dirt and common soils, algae and mildew.
Sansol
, even when used as a cleaning product, offers a deeply penetrating cleaning action to remove
soils and anti-bacterial action to neutralize mal odours at the source.
Do not apply
Sansol to painted surfaces. The concentrated mildly acid cleaning system can cause
paint to peel or crack, even at dilution.
Sansol should not be applied to painted surfaces or metal
surfaces containing aluminium, brass or copper.
