SHIELD 5L

RESHIELD
  • Description
  • More Details
Indoor and outdoor semi-permanent gloss sealer for concrete, unpolished stone, pavers and terracotta. Water based - non-yellowing, water, U.V & chemical resistant

SHIELD is a new one step, super tough, water based sealer that provides maximum protection on all types of concrete, unpolished stone, terrazzo and unglazed tiles and pavers. It is suitable for areas that are exposed to the elements such as entry foyers and decks, as well as factory and warehouse floors. Its non yellowing film is tough, glossy and chemical resistant. More importantly, it dries and cures quickly to enable fast re-use (very important in areas such as loading docks, hospitals, entry foyers etc..

The formulation offers a simple to use, non toxic odour free application which is ideal for food processing areas where solvent based sealers cannot be used.

Summary of Advantages with SHIELD

  • U.V. stabilised remains crystal clear under all conditions, so it will not yellow or soften, even in full sun.
  • Will not water white (cloud) in damp conditions.
  • Extremely low transfer from tyres.
  • Recoats easily.
  • Solvent and odour free water based formula.
  • Single product application (no base coat required).
  • Ultra tough and long wearing.

Directions for Use

Ensure surface is clean and dry.

New concrete should cure for 24 days prior to coating, terrazzo 14 days.

Preparation

New Floors

  1. Sweep or dust mop to remove loose debris or grit.
  2. Damp mop with Neutraclean at 1 part to 80 parts water.
  3. Rinse floor thoroughly with fresh water.

Existing Floors

  1. Sweep floor and machine scrub floor with Crossfire or Breakaway 1 part to 20 parts water.
  2. Rinse floor thoroughly with Neutro diluted 1 part to 100 parts water.

Application

Apply SHIELD in thin, even coats, using a poly cotton mop or applicator on smooth surfaces or by broom or brush on rough trowelled or exfoliated surfaces.

Depending on gloss level required, apply between 2-5 coats allowing approximately 1 hour between coats. (The more coats the higher the gloss level)

Application Rates

Steel trowelled (smooth) concrete Terrazzo, Pavers and Unglazed Tiles

  • 20 sq.mtr per 1 ltr first coat.
  • 30 sq.mtr per 1 ltr all further coats.

Wood floated or exfoliated surfaces

  • 15 sq.mtr per 1 ltr first coat.
  • 20 sq.mtr per 1 ltr all further coats.

Maintenance

Maintain with CROSSFIRE, NEUTRACLEAN or SUPASTAR as per labels.

Recoating

For best results, floors should be patch coated or touched up in traffic areas. Simply cut back with blue pad and NEUTRACLEAN diluted 1 part NEUTRACLEAN to 20 parts water. Rinse, let dry and re-apply.