All Purpose Stripper

Add to cart
  • Description
  • More details

A Heavy Duty Stripping Emulsion that effectively and quickly emulsifies all types of wax and acrylic floor polishes and restores floors to original condition.

Recommended stripper for use on sealed wood floors. Recommended to remove Gemini Sealer.

• Contains surfactants, wetting agents and additives
formulated specifically for the removal of all
types of waxes.
• Contains no petroleum type solvents or free caustic
 that may effect some surfaces or present fire

Dilute 1 part ALL PURPOSE STRIPPING EMULSION with up to 4 parts water, depending upon amount of  aged or dirty film to be removed and apply to a workable area through an automatic scrubbing machine or with mop and bucket. Allow 5 – 10 minutes contact, making sure the floor does not dry out and then scrub by machine fitted with BLACK strip pads.  Do edges with BLACK doodlebug pads, pick up all slurry and rinse with clean water. On drying ensure all dirty or aged film has been removed before recoating with desired product.

NOTE: Avoid contact of ALL PURPOSE STRIPPING EMULSION with eyes and skin and avoid breathing vapours. When stripping in confined areas ensure adequate ventilation is provided or wear approved organic solvent respirators. During the emulsification process most floors become very slippery. Care should be taken when working on wet floors.

First Aid  
Eyes: If splashed in eyes, flush with water for 15 min. Seek medical advice.
Skin: Wash affected area with soap and water.
Inhalation: If mists are inhaled, remove patient to fresh air. Seek medical advice.
Swallowed: Do not induce vomiting.  Give milk or water to dilute.   Seek medical advice.

Download All Purpose Stripper MSDS.