Make sure to keep the surface wet at all times when stripping. Storm can be used on vinyl, vinyl asbestos, rubber, no-wax linoleum, lino tile, marble, terrazzo, ceramic quarry tiles and most types of flooring. Storm is a fast, efficient, labour saving method for removing floor finishes and wax sealers with a minimum of scrubbing. Storm is a low odour ammonia free stripping system. Storm is caustic free and residue free.
Depending upon the degree of sealer on the floor, Storm can be diluted as follows: Storm Water Heavy Build-up 1 part 4 parts Moderate Build-up 1 part 6 parts Light Build-up/ 1 part 12 parts Add recommended amount of Storm to cold water and apply liberally to the floor.
Allow to work for 3 to 5 minutes, being sure to keep the floor wet. In most situations it is advisable to wet scrub the floor using a black pad on an autoscrubber or a low speed machine with a black pad.
Pick-up the dissolved sealer with an autoscrubber or mop and bucket.
Rinse the floor with clean water and allow the floor to dry before applying the sealer.
Note that since Storm is residue free it is not absolutely necessary to rinse the floor after stripping. Ultra High Performance Stripper . Low odour. Caustic and residue free. Liquefies old sealers on contact. Safe on most types of flooring