NULOOK CERAMIC TILE POWDER
WH30004
Ceramic Tile Cleaner Powder. Nulook utilises a caustic free, concentrated, non-resoiling formulation for the cleaning of ceramic tiled floors. Unlike most ceramic tile cleaners Nulook does not re-soil, even after repeated use. The Problem: Most, if not all, non-resilient floors are particularly prone to holding detergent residues in the pores or crevices on the flooring surface. The build-up of these residues is a major source of cleaning problems. Caustic detergents are particularly prone to causing detergent build-up. When detergent residues are a problem the floor rapidly resoils when walked on after cleaning. Ceramic tiled floors are frequently cleaned using highly caustic detergents. Although such detergents offer an aggressive solution to cleaning ceramic tiles they suffer from rapid resoiling and the residues from these detergents can be very slippery.
The Solution: Nulook utilises a caustic free non re-soiling formulation designed to penetrate the pores in ceramic tiles, remove and suspended soils and detergent residues. The caustic free formulation does not leave behind a greasy residue to attract dirt and soil. Detergents residues may also be effectively removed by using a small amount of Fabririnse (mild acidic detergent rinse). Directions: For difficult to clean and dirty floors apply dilute solution liberally to the floor. Allow to react for 10 to 15 minutes. Scrub the floor with a brush or soft pad. Pick-up dirty solution. 1. Autoscrubber: Add 1kg (4-5 cups) of Nulook to 60 litres of water. Pre-dissolve 1kg of Nulook in a bucket of warm to hot water and add to the tank of a 60 litre autoscrubber. DO NOT add directly to a tank without first dissolving powder.2. Mop & Bucket: Add 125 grams (1/2 cup) to 7.5 litres of warm to hot water. Benefits: Non re-soiling formula, Clean slip-resistant floors, Safer floors, Caustic free formula, Restores tiles to like new appearance
!
<<
|
4 KG
|
