TIMBERGLO
Timberglo is an easy to use one-step timber sealer designed for use on all types of timber floors. Timberglo is a clear, non-yellowing, high gloss timber sealer designed to enrich and enhance the natural colours of all types of timber floors. Timberglo conforms to the Australian Standard for the Slip Resistance of Pedestrian Surfaces AS 3661.
Timberglo is a simple to use one step sealing system. Timberglo requires only 1-hour drying time between coats enabling timber floors to be sanded and sealed in only one day. Timberglo reduces maintenance, inventory, downtime and training costs associated with the cleaning and maintenance of timber floors. WARNING: If applied to timber floors where wax polishes have been previously used, ensure old wax is completely removed by scrubbing the floor with mineral turpentine before using Timberglo. Failure to completely remove wax polishes may cause poor adhesion, peeling and powdering. Preparation:1. Sand floor with 120 mesh sanding disc. Thoroughly Vacuum and dust mop floor. 2. If a solvent wax polish was previously used, scrub with Surface Reviver at 1:4 dilution with water. Rinse floor with dilute detergent water and allow to dry. 3. If a water-based wax polish was previously used, scrub with Zip Strip or Storm at 1:4 dilution with water. Rinse floor with dilute detergent water and allow to dry. Application: 1. Apply 3 to 4 coats of Timberglo with a weighted bar applicator, lambswool applicator or mop and bucket. Allow approximately 1 hour drying time between coats. Maintenance: 1. Dust mop floor daily. Clean with Tempo HD or Citron neutral detergents. 2. For best results spray buff on a weekly basis using Start Up spray buffing
!
<<
|
|
