Task Force Powder Carpet Cleaner 10kg

PETAFOPO10
Add to cart
  • Description
  • More details

Task force is a powdered low foam formulation designed for use through portable and truck mount wet extraction systems alike. May also be used as a powerful pre-spray.

A unique deep clean combination of water-soluble solvents, alkaline salts and top grade surfactants leaving a fresh smelling carpet free of grease and dirt. It is designed to provide very gentle cleaning action and freshening that leaves carpets, rugs and upholstery de-odorised and free of grease and dirt. It should only be used with steam or hot water extraction units or wet vacuum units. Task Force exhibits a low foam profile and moderately alkaline pH.

USE:
For industrial use only.  DO NOT SWALLOW.  Remove furniture as necessary. Dry vacuum. Pre-treat badly stained spots by pre-spraying with a solution of 10 grams of Task Force Carpet Cleaning Powder per litre of water.  Prepare a ‘Use Solution’ by adding 40 grams of powder per litre of water.  Mix until all powder is dissolved.  Heavy soil on carpet may require 80 grams of powder per litre of water.  Corners should be scrubbed with a hand brush dipped in 10 grams per litre of water.  Pour ‘Use Solution’ into tank and proceed to steam clean carpets followed by vacuuming.  Allow carpet to dry (typically 1 – 4 hours depending on pile height, humidity and air flow).  Once dry, vacuum carpet to pick up soil and reset pile.  Allow carpet to dry thoroughly before replacing furniture.  Wash all equipment with warm water and allow to dry before storage.

SAFETY:
First Aid:
Eyes:
If splashed in eyes, flush with water for 15min. Seek medical advice.
Skin: Wash affected area with soap and water.
Inhalation: If mists are inhaled, remove patient to fresh air. Seek medical advice.
Swallowed: Do NOT induce vomiting. Give milk or water to dilute.  Seek medical advice

Download Taskforce Powder Carpet Cleaner MSDS