Diggers Pale Boiled Linseed Oil

From
Add to cart
  • Description
  • More details

Diggers Pale Boiled Linseed Oil is a treated linseed oil with added drying agents to speed up drying time. It dries faster than Diggers Raw Linseed Oil.

Great for use as a sealer and protective coating for concrete paths, floors, flagstones and interlocking stones. It creates a finish that is generally impervious to water, heat, scratches and most stains.

Pale Boiled Linseed Oil also works to seal timber, protecting indoor furniture and cabinets, and makes an excellent thinner for artist's oil paints.

Application:

Timber Protection
1. Clean and dry surface. Mix Diggers Pale Boiled Linseed Oil 50:50 with Diggers Mineral Turpentine for increased timber protection.
2. Apply two coats with a brush, roller or spray gun. Diggers Pale Boiled Linseed Oil should be applied in very thin coats and rubbed well into the wood. It is important to allow drying time between coats. Clean excess oil with a clean lint free cloth to avoid the surface drying sticky.

How does Linseed Oil work?
When linseed oil is applied to a porous surface it fills the pores and as it is exposed to the
air it gels to form a protective film. The film is generally impervious to water, heat, scratches
and most stains.

NOTE: Soak rags in water as spontaneous ignition may occur on drying. Dispose of rags by
controlled incineration or at an approved landfill.

Safety:

Wear suitable protective clothing, gloves and eye / face protection when using this product.