Two doses into 300ml water-filled Divermite R1 bottle (10% in-use solution).Directions for use:
Remove the spout cap from the Divermite R1 bottle and fill with clean, fresh
water to the level mark indicated on the bottle (300ml). Push the Divermite R1
dispenser button twice to add product. Securely screw-on the spout cap (spout
must be in the closed position) and shake gently to mix.Application:
Flush the toilet bowl or urinal. Gently squeeze the Divermite R1 bottle to direct
product under the rim, around the bowl and onto water/flush paths. Distribute
with toilet brush. Allow at least 10 minutes contact time, use a brush or sponge
pad to remove difficult stains, then flush to rinse.Important :
Do not use on acid-sensitive surfaces, e.g. enamel, marble, grouting.
Immediately remove any drops or splashes from acid-sensitive surfaces and
rinse with water. Do not mix with bleach or other cleaning products.
Test material compatibility in a small, inconspicuous place before use. Do not
use with other dilution systems or methods. Do not use undiluted.
DOWNLOAD ROOM CARE R1 PLUS TOILET CLEANER MSDS