High Speed

Speedflow White
DAM06A
!

Technical data for all models:

All Speedflow models use the same componentry, the differences being casing material and finish. Note that the Speedflow has an adjustable fan speed, from 3800 to 8200 rpm, which is reflected in some of the figures being displayed as a range.

WARRANTY

7 years: 3 years labour / 7 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench.
  • Aluminium base, with Ø 8 mm holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Fire resistant plastic UL 94-V0 fan scroll.
  • High speed motor. Universal brush motor, 3800-8200 rpm, A class. RPM may be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off at 120ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Waved wire NiCr heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80ºC which disconnect the whole appliance.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.

TECHNICAL SPECIFICATIONS

Voltage 100-120, 208, 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 289 x 266.8 x 100 (M06A/AC/ACS)
294 x 270.5 x 100 (M06AF)
Weight 3.6 kg (M06A/AC/ACS)
6.9 kg (M06AF)
Effective airflow 61-98 m3/h, 1012-1632 l/min
Nominal airflow 73-118 m3/h, 1215-3200 l/min
Air velocity 90-180 Km/h
Total power 1150 W
Motor power 250 W
Heating element power 900 W
Consumption 4.8 A (240 V)
RPM 3800 - 8200
Air temperature (10 cm distance / 21 ºC) 41 - 44 ºC
Noise level (at 2 m) 64-74 dB
Protection level IP23

Speedflow Stainless Chrome
DAM06AC
!

Technical data for all models:

All Speedflow models use the same componentry, the differences being casing material and finish. Note that the Speedflow has an adjustable fan speed, from 3800 to 8200 rpm, which is reflected in some of the figures being displayed as a range.

WARRANTY

7 years: 3 years labour / 7 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench.
  • Aluminium base, with Ø 8 mm holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Fire resistant plastic UL 94-V0 fan scroll.
  • High speed motor. Universal brush motor, 3800-8200 rpm, A class. RPM may be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off at 120ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Waved wire NiCr heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80ºC which disconnect the whole appliance.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.

TECHNICAL SPECIFICATIONS

Voltage 100-120, 208, 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 289 x 266.8 x 100 (M06A/AC/ACS)
294 x 270.5 x 100 (M06AF)
Weight 3.6 kg (M06A/AC/ACS)
6.9 kg (M06AF)
Effective airflow 61-98 m3/h, 1012-1632 l/min
Nominal airflow 73-118 m3/h, 1215-3200 l/min
Air velocity 90-180 Km/h
Total power 1150 W
Motor power 250 W
Heating element power 900 W
Consumption 4.8 A (240 V)
RPM 3800 - 8200
Air temperature (10 cm distance / 21 ºC) 41 - 44 ºC
Noise level (at 2 m) 64-74 dB
Protection level IP23

Speedflow Stainless Satin
DAM06ACS
!

Technical data for all models:

All Speedflow models use the same componentry, the differences being casing material and finish. Note that the Speedflow has an adjustable fan speed, from 3800 to 8200 rpm, which is reflected in some of the figures being displayed as a range.

WARRANTY

7 years: 3 years labour / 7 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench.
  • Aluminium base, with Ø 8 mm holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Fire resistant plastic UL 94-V0 fan scroll.
  • High speed motor. Universal brush motor, 3800-8200 rpm, A class. RPM may be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off at 120ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Waved wire NiCr heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80ºC which disconnect the whole appliance.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.

TECHNICAL SPECIFICATIONS

Voltage 100-120, 208, 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 289 x 266.8 x 100 (M06A/AC/ACS)
294 x 270.5 x 100 (M06AF)
Weight 3.6 kg (M06A/AC/ACS)
6.9 kg (M06AF)
Effective airflow 61-98 m3/h, 1012-1632 l/min
Nominal airflow 73-118 m3/h, 1215-3200 l/min
Air velocity 90-180 Km/h
Total power 1150 W
Motor power 250 W
Heating element power 900 W
Consumption 4.8 A (240 V)
RPM 3800 - 8200
Air temperature (10 cm distance / 21 ºC) 41 - 44 ºC
Noise level (at 2 m) 64-74 dB
Protection level IP23

Machflow White
DAM09A
!

Technical data for all models:

All Mediclinics Machflow models use the same components, the differences being casing material and finish. Note that the Mediclinics Machflow has an adjustable fan speed, from 19,000 to 30,000 rpm, which is reflected in some of the figures being displayed as a range.

COMPONENTS AND MATERIALS

  • Stainless steel AISI 304 once-piece cover, bright finish, 1.5 mm thick.
  • Cover fixed to the base by means of 2 screws.
  • ABS base for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Vacuum universal brush motor, F class. RPM may be adjusted manually by means of a potentiometer.
  • Automatic disconnection after 60 seconds of continuous use.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 330 x 213 x 170
Weight 4.7 kg
Nominal airflow 187 m3/h (3,120 l/min)
Air velocity 325 Km/h
Total power (Motor only) 420 - 1150 W
Consumption 3.3 – 4.7 A
RPM 19,000 – 30,000
Air temperature (10 cm distance / 21 ºC) 40 ºC
Noise level (at 2 m) 68-75 dB
Protection level IP23

Machflow Stainless Chrome
DAM09AC
!

Technical data for all models:

All Mediclinics Machflow models use the same components, the differences being casing material and finish. Note that the Mediclinics Machflow has an adjustable fan speed, from 19,000 to 30,000 rpm, which is reflected in some of the figures being displayed as a range.

COMPONENTS AND MATERIALS

  • Stainless steel AISI 304 once-piece cover, bright finish, 1.5 mm thick.
  • Cover fixed to the base by means of 2 screws.
  • ABS base for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Vacuum universal brush motor, F class. RPM may be adjusted manually by means of a potentiometer.
  • Automatic disconnection after 60 seconds of continuous use.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 330 x 213 x 170
Weight 4.7 kg
Nominal airflow 187 m3/h (3,120 l/min)
Air velocity 325 Km/h
Total power (Motor only) 420 - 1150 W
Consumption 3.3 – 4.7 A
RPM 19,000 – 30,000
Air temperature (10 cm distance / 21 ºC) 40 ºC
Noise level (at 2 m) 68-75 dB
Protection level IP23

Machflow Stainless Satin
DAM09ACS
!

Technical data for all models:

All Mediclinics Machflow models use the same components, the differences being casing material and finish. Note that the Mediclinics Machflow has an adjustable fan speed, from 19,000 to 30,000 rpm, which is reflected in some of the figures being displayed as a range.

COMPONENTS AND MATERIALS

  • Stainless steel AISI 304 once-piece cover, bright finish, 1.5 mm thick.
  • Cover fixed to the base by means of 2 screws.
  • ABS base for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Vacuum universal brush motor, F class. RPM may be adjusted manually by means of a potentiometer.
  • Automatic disconnection after 60 seconds of continuous use.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 330 x 213 x 170
Weight 4.7 kg
Nominal airflow 187 m3/h (3,120 l/min)
Air velocity 325 Km/h
Total power (Motor only) 420 - 1150 W
Consumption 3.3 – 4.7 A
RPM 19,000 – 30,000
Air temperature (10 cm distance / 21 ºC) 40 ºC
Noise level (at 2 m) 68-75 dB
Protection level IP23

Dualflow White
DAM08A
!

Technical data for all models:

All Mediclinics Dualflow models use the same components, the differences being casing material and finish.

WARRANTY

7 years: 3 years labour / 7 years parts

COMPONENTS AND MATERIALS

  • Cover: High impact 3mm thick ABS.
  • Motor: Two universal brush motors, high speed, 30000 rpm, F class.
  • No heating element.
  • Antibacterial materials: Microban antibacterial protection embedded in drying areas.
  • Fan wheel: Aluminum centrifugal double asymmetric inlet fan wheel, aluminum scroll fan and safety thermal cut-off.
  • Sensor operation: Electronic infrared detection sensor with polycarbonate viewing window.
  • Automatic shut-off after 23 seconds.
  • Water waste collection with automatic visual and audio maintenance alert
  • Odourless filter system available.
  • Mounting brackets: Galvanized steel with three holes for wall mounting.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class II (grounding not required)
Dimensions (W x H x D, in mm) 300 x 617 x 195
Weight 9.55 kg
Air velocity 210 km/h
Total power 1760 W
Motor power 880 W
Consumption 8 A
RPM 30000
Air temperature (10 cm distance / 21 ºC) 40 ºC
Drying time* 10 – 15 sec
Noise level (at 2 m) 70 dB
Protection level IP23
Finishes White / Bright chrome / Satin chrome

*Note: Drying time may vary with ambient conditions

Dualflow Stainless Satin
DAM08ACS
!

Technical data for all models:

All Mediclinics Dualflow models use the same components, the differences being casing material and finish.

WARRANTY

7 years: 3 years labour / 7 years parts

COMPONENTS AND MATERIALS

  • Cover: High impact 3mm thick ABS.
  • Motor: Two universal brush motors, high speed, 30000 rpm, F class.
  • No heating element.
  • Antibacterial materials: Microban antibacterial protection embedded in drying areas.
  • Fan wheel: Aluminum centrifugal double asymmetric inlet fan wheel, aluminum scroll fan and safety thermal cut-off.
  • Sensor operation: Electronic infrared detection sensor with polycarbonate viewing window.
  • Automatic shut-off after 23 seconds.
  • Water waste collection with automatic visual and audio maintenance alert
  • Odourless filter system available.
  • Mounting brackets: Galvanized steel with three holes for wall mounting.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class II (grounding not required)
Dimensions (W x H x D, in mm) 300 x 617 x 195
Weight 9.55 kg
Air velocity 210 km/h
Total power 1760 W
Motor power 880 W
Consumption 8 A
RPM 30000
Air temperature (10 cm distance / 21 ºC) 40 ºC
Drying time* 10 – 15 sec
Noise level (at 2 m) 70 dB
Protection level IP23
Finishes White / Bright chrome / Satin chrome

*Note: Drying time may vary with ambient conditions