Premium

Mediflow White
DAM02A
!

Technical data for all models:

All Mediclinics Mediflow models use the same components, the differences being casing material and finish.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow® wrench.
  • Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 4500 rpm, F class, incorporates a self-resetting safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetting safety thermal cut-off at 110 ºC. Automatic disconnection 1/2 second before motor stops.
  • Logic Dry technology: Automatic regulation of air temperature based on ambient temperature.
  • Selective detection of fixed targets and automatic disconnection after 120 seconds of continuous use.
  • Fully adjustable (5 - 20 cm) IR electronic detection sensor. Adjustment is by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class II
Dimensions (W x H x D, in mm) 272x 320x 164 mm (M02A)
272x 325x 164 mm (M02AC, ACS)
Weight 4.85 kg (M02A)
4.25 kg (M02AC, ACS)
Effective airflow 450 m³/h (7.500 l/min)
Nominal airflow 540 m³/h (9000 l/min)
Air velocity 95 km/h
Total power 250- 2750 W
Motor power 250 W
Heating element power 0- 2500 W
Consumption 1.1 – 12 A
RPM 4500
Air temperature (10 cm distance / 21 ºC) 49 ºC
Drying time* 29 sec
Noise level (at 2 m) 65 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Mediflow Stainless Chrome
DAM02AC
!

Technical data for all models:

All Mediclinics Mediflow models use the same components, the differences being casing material and finish.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow® wrench.
  • Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 4500 rpm, F class, incorporates a self-resetting safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetting safety thermal cut-off at 110 ºC. Automatic disconnection 1/2 second before motor stops.
  • Logic Dry technology: Automatic regulation of air temperature based on ambient temperature.
  • Selective detection of fixed targets and automatic disconnection after 120 seconds of continuous use.
  • Fully adjustable (5 - 20 cm) IR electronic detection sensor. Adjustment is by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class II
Dimensions (W x H x D, in mm) 272x 320x 164 mm (M02A)
272x 325x 164 mm (M02AC, ACS)
Weight 4.85 kg (M02A)
4.25 kg (M02AC, ACS)
Effective airflow 450 m³/h (7.500 l/min)
Nominal airflow 540 m³/h (9000 l/min)
Air velocity 95 km/h
Total power 250- 2750 W
Motor power 250 W
Heating element power 0- 2500 W
Consumption 1.1 – 12 A
RPM 4500
Air temperature (10 cm distance / 21 ºC) 49 ºC
Drying time* 29 sec
Noise level (at 2 m) 65 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Mediflow Stainless Satin
MA02ACS
!

Technical data for all models:

All Mediclinics Mediflow models use the same components, the differences being casing material and finish.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow® wrench.
  • Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 4500 rpm, F class, incorporates a self-resetting safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetting safety thermal cut-off at 110 ºC. Automatic disconnection 1/2 second before motor stops.
  • Logic Dry technology: Automatic regulation of air temperature based on ambient temperature.
  • Selective detection of fixed targets and automatic disconnection after 120 seconds of continuous use.
  • Fully adjustable (5 - 20 cm) IR electronic detection sensor. Adjustment is by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class II
Dimensions (W x H x D, in mm) 272x 320x 164 mm (M02A)
272x 325x 164 mm (M02AC, ACS)
Weight 4.85 kg (M02A)
4.25 kg (M02AC, ACS)
Effective airflow 450 m³/h (7.500 l/min)
Nominal airflow 540 m³/h (9000 l/min)
Air velocity 95 km/h
Total power 250- 2750 W
Motor power 250 W
Heating element power 0- 2500 W
Consumption 1.1 – 12 A
RPM 4500
Air temperature (10 cm distance / 21 ºC) 49 ºC
Drying time* 29 sec
Noise level (at 2 m) 65 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Saniflow White Manual
DAM02A
!

Technical data for all models:

All Mediclinics Saniflow models use the same components, the differences being casing material, finish and the manual push-button option.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow® wrench.
  • Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 5500 rpm, F class, incorporates a self-resetable safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Waved wire NiCr heating element on a mica frame that incorporates a self-resetable safety thermal cut-off at 80 ºC.
  • Fully rotating nozzle in chrome plated zamak (Chrome 22 µm thick).
  • Fully adjustable (15 - 25 cm) IR electronic detection sensor (E05A, AC, ACS).
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.
  • Detection LEDs integrated in the electronic PC board
  • Push button (E05): Chrome plated Zamak (Chrome 22 µm thick) activates an electronic timer with a 35 second cycle.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 276 x 245 x 210
Weight 4.9 kg (E05)
4.65 kg (E05A, AC, ACS)
Effective airflow 330 m3/h (5500 l/min)
Nominal airflow 470 m3/h (7800 l/min)
Air velocity 96 km/h
Total power 2250 W
Motor power 250 W
Heating element power 2000 W
Consumption 10 A
RPM 5500
Air temperature (10 cm distance / 21 ºC) 53 ºC
Drying time* 29 sec
Noise level (at 2 m) 70 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Saniflow White
DAE05A
!

Technical data for all models:

All Mediclinics Saniflow models use the same components, the differences being casing material, finish and the manual push-button option.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow® wrench.
  • Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 5500 rpm, F class, incorporates a self-resetable safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Waved wire NiCr heating element on a mica frame that incorporates a self-resetable safety thermal cut-off at 80 ºC.
  • Fully rotating nozzle in chrome plated zamak (Chrome 22 µm thick).
  • Fully adjustable (15 - 25 cm) IR electronic detection sensor (E05A, AC, ACS).
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.
  • Detection LEDs integrated in the electronic PC board
  • Push button (E05): Chrome plated Zamak (Chrome 22 µm thick) activates an electronic timer with a 35 second cycle.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 276 x 245 x 210
Weight 4.9 kg (E05)
4.65 kg (E05A, AC, ACS)
Effective airflow 330 m3/h (5500 l/min)
Nominal airflow 470 m3/h (7800 l/min)
Air velocity 96 km/h
Total power 2250 W
Motor power 250 W
Heating element power 2000 W
Consumption 10 A
RPM 5500
Air temperature (10 cm distance / 21 ºC) 53 ºC
Drying time* 29 sec
Noise level (at 2 m) 70 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Saniflow Stainless Chrome
DAE05AC
!

Technical data for all models:

All Mediclinics Saniflow models use the same components, the differences being casing material, finish and the manual push-button option.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow® wrench.
  • Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 5500 rpm, F class, incorporates a self-resetable safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Waved wire NiCr heating element on a mica frame that incorporates a self-resetable safety thermal cut-off at 80 ºC.
  • Fully rotating nozzle in chrome plated zamak (Chrome 22 µm thick).
  • Fully adjustable (15 - 25 cm) IR electronic detection sensor (E05A, AC, ACS).
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.
  • Detection LEDs integrated in the electronic PC board
  • Push button (E05): Chrome plated Zamak (Chrome 22 µm thick) activates an electronic timer with a 35 second cycle.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 276 x 245 x 210
Weight 4.9 kg (E05)
4.65 kg (E05A, AC, ACS)
Effective airflow 330 m3/h (5500 l/min)
Nominal airflow 470 m3/h (7800 l/min)
Air velocity 96 km/h
Total power 2250 W
Motor power 250 W
Heating element power 2000 W
Consumption 10 A
RPM 5500
Air temperature (10 cm distance / 21 ºC) 53 ºC
Drying time* 29 sec
Noise level (at 2 m) 70 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Saniflow Stainless Chrome
DAE05ACS
!

Technical data for all models:

All Mediclinics Saniflow models use the same components, the differences being casing material, finish and the manual push-button option.

WARRANTY

12 years: 6 years labour / 12 years parts (terms apply)

COMPONENTS AND MATERIALS

  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow® wrench.
  • Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
  • Fire resistant plastic UL 94-VO fan scroll.
  • Universal brush motor, 5500 rpm, F class, incorporates a self-resetable safety thermal cut-off at 120 ºC.
  • Aluminium centrifugal double symmetrical inlet fan wheel.
  • Waved wire NiCr heating element on a mica frame that incorporates a self-resetable safety thermal cut-off at 80 ºC.
  • Fully rotating nozzle in chrome plated zamak (Chrome 22 µm thick).
  • Fully adjustable (15 - 25 cm) IR electronic detection sensor (E05A, AC, ACS).
  • Sensors come with a polycarbonate viewing window.
  • Four silent blocks to eliminate vibrations.
  • Detection LEDs integrated in the electronic PC board
  • Push button (E05): Chrome plated Zamak (Chrome 22 µm thick) activates an electronic timer with a 35 second cycle.

TECHNICAL SPECIFICATIONS

Voltage 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 276 x 245 x 210
Weight 4.9 kg (E05)
4.65 kg (E05A, AC, ACS)
Effective airflow 330 m3/h (5500 l/min)
Nominal airflow 470 m3/h (7800 l/min)
Air velocity 96 km/h
Total power 2250 W
Motor power 250 W
Heating element power 2000 W
Consumption 10 A
RPM 5500
Air temperature (10 cm distance / 21 ºC) 53 ºC
Drying time* 29 sec
Noise level (at 2 m) 70 dB
Protection level IP23
Finishes: White / Bright SS / Brushed SS

*Note: Drying time may vary with ambient conditions

Puregiene® Rapide White Hand Dryer
PU110207
!

Top of the range high velocity hand dryer for medium & high traffic areas.
Super sturdy one piece steel cover with White Epoxy finish. Low profile (only 100mm protusion from the wall) makes this unit ideal for confined spaces.
Air velocity up to 180km/h means drying times are as low as 12 seconds!
No electrician required - plugs into standard powerpoint
No more annoying refilling of hand towel dispensers!

1 year warranty

Height: 270
Width : 289
Depth: 100

Puregiene® Rapide White Hand Dryer
PU110208
!

Top of the range high velocity hand dryer for medium & high traffic areas.
Super sturdy one piece steel cover with Satin Stainless Steel finish. Low profile (only 100mm protusion from the wall) makes this unit ideal for confined spaces.
Air velocity up to 180km/h means drying times are as low as 12 seconds!
No electrician required - plugs into standard powerpoint.
No more annoying refilling of hand towel dispensers!

1 year warranty

Height: 270
Width : 289
Depth: 100