Terrazo - Stone - Slate

IMPACT

!

Suitable for use on Stone, Terrazzo,

Tiles and Concrete

Ultra Hard- resists scratching

Water based

Excellent Levelling Properties

High Gloss

Slip Resistant (under AS/NZS 4663:2002)

Does not use toxic or carcinogenic solvents

such as Toluene and Xylene

Semi Permanent Seal

Marbletech Sealer

!
High adhesion, wet look and wear resistance on stone or terrazzo surfaces when burnished with electric or gas burnishers. Usually applied over base sealer BLOCKADE for extended wear resistance on stone. May also be used on unglazed quarry tiles or terracottaLong life, wet look gloss, slip resistant sealer finish

The ideal choice for terrazzo, marble and granite as well as unglazed terracotta, quarry tile and slate floors. MARBLETECH is a totally new sealer finish developed to give ultra clear, non-yellowing, rich and deep gloss floors that resist scratching and loss of gloss in heavy traffic.

Blockade Base Coat Stone Sealer

!

Concrete, exfoliated granite and porous stone or paver sealer. Odourless, water-based, non-yellowing acrylic, superior adhesion, quick drying.

Unique chemistry provides an abrasion resistant sealer for concrete, stone and terrazzo. Unique oil compatibility so it cannot peel off old factory floors. Ideal pre-sealer for terrazzo and covered outdoor use.

Filmstar High Traction Sealer

!

Polymer science gives you high traction, supergrip floors under wet or dry cnditions. Incredible wearability and ultra high gloss. Use over Bedrock in supermarkets, BLOCKADE on stone/terrazzo

  • Ultra high traction, wet look sealer finish.
  • The Chronic Need for High Traction Floors.

THERMAGLO PLUS

!
Larger picture
Vinyl, terrazzo and timber finish. Burnishable from 250-2000 rpm. May be used as a one-step sealer and finish. easy to use and most reliable for any situation. Provides wet look gloss.
Thermaglo Plus is a clear, non-yellowing, high gloss finish designed to enrich and enhance the natural colours of all types of floors.Thermaglo Plus is a simple to use sealer / sealer finish designed for use on a variety of floors from vinyl to terrazzo and timber. 

Spartacus Wet Look Sealer

!

Easy to lay, easy to maintain U.H.S. formula. Excellent gloss and easy burnishing. A top, economical performer with ultra clarity and repairability. Ideal “goof proof” product for all types of floors

  • Low speed and high speed, wet look super tough sealer polish.
  • New improved formula

Glazer Floor Sealer

!

Polyurethane fortified sealer finish for floors

Safe at Any Speed 300 to 2000+ RPM

One of the most wear resistant urethane injected finishes we’ve ever made, great resistance to marking and scuffing. Ideal sealer finish for sheet vinyl for mop and re-coat areas, great topcoat on urethaned timber. U.H.S safe.

Satin Star

!

Satin finish for most surfaces with great wearability and chemical resistance. Commercial vinyl-preseal with Bedrock. Other floor surfaces no need to pre-seal, apply two to five coats depending on depth of gloss required

Satin Star has been formulated to give a satin finish to most surfaces with great wearability and chemical resistance.

Barricade Impregnating Sealer Stone Protetcor

5 L
RE53815A
!
Water based stain protector for stone, composite stone, concrete subsurface, invisible, suitable for outdoor use.

Barrier 2 Solvent Based Sealer

!
Stain protector for all stone, composite stone, concrete subsurface, invisible, use indoors and outdoors

Solitare Floor sealer

!

Suitable for indoor/outdoor use. Water based one step, super tough sealer that provides protection on all types of concrete, stone, terrazzo, glazed and unglazed tiles and pavers. Tough, glossy, chemical resistant. Low VOC content

OUR BEST SELLER FOR POLISHED CONCRETE AND STONE

Spartacus Wet Look Sealer

!

Easy to lay, easy to maintain U.H.S. formula. Excellent gloss and easy burnishing. A top, economical performer with ultra clarity and repairability. Ideal “goof proof” product for all types of floors

  • Low speed and high speed, wet look super tough sealer polish.
  • New improved formula